DF5A6.8LFU_07 Datasheet, PDF (1/3 Pages) Toshiba Semiconductor – Product for Use Only as Protection against Electrostatic Discharge (ESD)

DF5A6.8LFU
TOSHIBA Diodes for Protecting against ESD Epitaxial Planar Type
DF5A6.8LFU
Product for Use Only as Protection against Electrostatic
Discharge (ESD)
Unit: mm
* This product is for protection against electrostatic discharge (ESD) only
and is not intended for any other usage, including without limitation,
the constant voltage diode application.
• The mounting of four devices on an ultra-compact package allows the
number of parts and the mounting cost to be reduced.
• Low Terminal capacitance (between Cathode and Anode)
: C_T = 6.0 pF (typ.)
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Power dissipation
P
200
mW
Junction temperature
T_j
125
°C
Storage temperature range
T_stg
−55 ~ 125
°C
JEDEC
⎯
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in
JEITA
⎯
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e.
operating temperature/current/voltage, etc.) are within the absolute
TOSHIBA
1-2V1B
Weight: 0.0062 g (typ.)
maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Electrical Characteristics (Ta = 25°C)
Characteristics
Zener voltage
Dynamic impedance
Knee dynamic impedance
Reverse current
Terminal capacitance
(between Cathode and Anode)
Symbol
V_Z
Z_Z
Z_ZK
I_R
C_T
Test Condition
I_Z = 5 mA
I_Z = 5 mA
I_Z = 0.5 mA
V_R = 5 V
V_R = 0 V, f = 1 MHz
Min Typ. Max Unit
6.5 6.8 7.1
V
⎯
⎯
50
Ω
⎯
⎯
100
Ω
⎯
⎯
0.5
μA
⎯
6.0
⎯
pF
Guaranteed Level of ESD Immunity
Test Condition
ESD Immunity Level
IEC61000-4-2
(Contact discharge)
± 8kV
Criterion: No damage to device elements
1
2007-11-01