|
DF10G5M4N Datasheet, PDF (1/8 Pages) Toshiba Semiconductor – This product is designed for protection against electrostatic discharge and is not intended for any other purpose, including, but not limited to, voltage regulation. | |||
|
DF10G5M4N
TOSHIBA Diodes for Protecting against ESD
DF10G5M4N
Application
- ESD Protection
Note: This product is designed for protection against electrostatic discharge
(ESD) and is not intended for any other purpose, including, but not limited to,
voltage regulation.
Abusolute Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
Unit
Electrostatic discharge voltage
IEC61000-4-2(Contact)
IEC61000-4-2(Air)
VESD
(Note 1)
± 23
± 25
kV
Peak pulse power ( tp = 8 / 20 s )
PPK
30
W
Maximum peak pulse current ( tp = 8 / 20 s )
IPP
(Note 2)
2
A
Junction temperature
Tj
150
ï°C
Storage temperature range
Tstg
â55 to 150
ï°C
Note1 : according to IEC61000-4-2
Note2 : according to IEC61000-4-5
Note3:Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in temperature, etc.) may
cause this product to decrease in the reliability significantly even if the operating
conditions (i.e. operating temperature/current/voltage, etc.) are within the
absolute maximum ratings.Please design the appropriate reliability upon
reviewing the Toshiba Semiconductor Reliability Handbook (âHandling
Precautionsâ/ âDerating Concept and Methodsâ) and individual reliability data
(i.e. reliability test report and estimated failure rate, etc).
DFN10
1:I/O 6:NC
2:I/O 7:NC
3:GND 8:NC
4:I/O 9:NC
5:I/O 10:NC
JEDEC
ï¾
JEITA
ï¾ï
TOSHIBA
ï¾
Weight: 3.2mg (typ.)
Electrical Characteristics (Ta = 25°C)
VRWM : Working peak reverse voltage
VBR : Reverse breakdown voltage
IBR : Reverse breakdown current
IR : Reverse Current
VC : Clamping Voltage
IPP : Peak pulse current
RDYN : Dynamic resistance
1
2015-09-29
|
▷ |