CRG05 Datasheet, PDF (1/4 Pages) Toshiba Semiconductor – General-Purpose Rectifier Applications

TOSHIBA Rectifier Silicon Diffused Type
CRG05
General-Purpose Rectifier Applications
• Repetitive peak reverse voltage: V_RRM = 800 V
②
• Average forward current: I_{F (AV)} = 1.0 A
• Average forward voltage: V_FM = 1.2V (Max.)
• Suitable for high-density board assembly due to the use of a small
surface-mount package, S−FLAT
CRG05
Unit: mm
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
0.9 ± 0.1
0.16
+ 0.2
①
1.6 − 0.1
Repetitive Peak Reverse Voltage
V_RRM
Average Forward Current
I_{F (AV)}
Peak One Cycle Surge Forward
Current (Non−Repetitive)
I_FSM
Junction Temperature
T_j
Storage Temperature Range
T_stg
Note 1: Ta=54°C
Device mounted on a ceramic board
board size: 50 mm × 50 mm
soldering land: 2 mm ×2 mm
board thickness: 0.64 mm
Half-sine waveform: α =180°
800
V
1.0(Note1)
A
15.0 (50Hz)
A
−40 to 150
°C
−40 to 150
°C
① ANODE
② CATHODE
JEDEC
―
JEITA
―
TOSHIBA
3-2A1A
Weight: 0.013 g (typ.)
Note 2: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
1
2008-02-01