CMS10 Datasheet, PDF (1/4 Pages) Toshiba Semiconductor – TOSHIBA SCHOTTKY BARRIER RECTIFIER SCHOTTKY BARRIER TYPE

CMS10
TOSHIBA SCHOTTKY BARRIER RECTIFIER SCHOTTKY BARRIER TYPE
CMS10
○SWITHING MODE POWER SUPPLY APPLICATIONS
○PORTABLE EQUIPMENT BATTERY APPLICATIONS
Unit:mm
2
●Forward Voltage
：V_FM=0.55V(Max.)
●Average Forward Current
：I_F(AV)=1.0A
●Repetitive Peak Reverse Voltage ：V_RRM=40V
●Small &　Thin　Package
●MAXIMUM RATINGS
CHARACTERISTIC
SYMBOL
Repetitive Peak Reverse Voltage ^VRRM
RATING
40
UNIT
V
Average Forward Current *1
Peak One Cycle Surge Forward
Current(Non-Repetitive)
I_F(AV)
1.0
(Ta=21℃)
A
I_FSM 25(50Hz) A
Junction Temperature
T_j
-40～150 ℃
Storage Temperature
Tstg _{-40～150 ℃}
*1 Glass-epoxy Substrate(Substrate size:50mm*50mm
Soldering land:6mm*6mm)
1.7
2.4
1
ɹɹ
JEDEC
EIAJ
TOSHIBA
Weight:0.023g
●ELECTRICAL CHARACTERISTICA(Ta=25℃)
CHARACTERISTIC
SYMBOL
TEST CONDITION
V_FM(1) I_FM=0.1A
MIN.
-
Peak Forward Voltage
V_FM(2) I_FM=0.5A
-
V_FM(3) I_FM=1.0A
-
I_RRM V_RRM=5V
-
Repetitive Peak Reverse Current
I_RRM V_RRM=40V
-
Junction Capacitance
Cj _{VR=10V,f=1.0MHz}
-
Thermal Resistance
Rth(j-a)
On ceramic substrate
(Solderring Land　2mm×2mm)
On glass-epoxy substrate
(Solderrring Land 6mm×6mm)
-
-
Rth(j-l)
-
-
0 .1 6
1:A node
2 :C a th o d e
-
-
-
TYP. MAX. UNIT
0.34 -
V
0.41 -
V
0.47 0.55 V
1.0
- μA
8.0 500 μA
50
-
pF
-
60 _℃/W
-
135 _℃/W
-
16 ℃/W
TOSHIBA　is continually working to improve the quality and the reliability of its products.nevertheless,semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress.
It is the responsibility of the buyer,when utilizing TOSHIBA products, to observe standards of safety,and to avoid
situations in which a malfunction or failure of a TOSHIBA product could cause loss of human life,bodily injury or damage
to property.In developing your designs,plese ensure that TOSHIBA products are used within specified operating ranqes
as set forth in the most recent products specifications.Also, please keep in mind the precautions and conditions set forth
in the TOSHIBA Semiconductor Reliability Handbook.
The information contained herein is presented only as a guide for the applications of our products. No responsibility is
assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties
which may result from its use. No license is granted by implication or otherwise under any intellectual property or other
rights of TOSHIBA CORPORATION or others.
The information contained herein is subject to change without notice.
2000-07-18 1/4