|
2SA970-BL Datasheet, PDF (1/4 Pages) Toshiba Semiconductor – Low Noise Audio Amplifier Applications | |||
|
2SA970
TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT process)
2SA970
Low Noise Audio Amplifier Applications
⢠Low noise :NF = 3dB (typ.) RG = 100 â¦, VCE = â6 V, IC = â100 μA,
f = 1 kHz
: NF = 0.5dB (typ.) RG = 1 kâ¦, VCE = â6 V, IC = â100 μA,
f = 1 kHz
⢠High DC current gain: hFE = 200~700
⢠High breakdown voltage: VCEO = â120 V
⢠Low pulse noise. Low 1/f noise
Unit: mm
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Collector-base voltage
Collector-emitter voltage
Emitter-base voltage
Collector current
Base current
Collector power dissipation
Junction temperature
Storage temperature range
VCBO
VCEO
VEBO
IC
IB
PC
Tj
Tstg
â120
V
â120
V
â5
V
â100
mA
â20
mA
300
mW
125
°C
â55~125
°C
JEDEC
JEITA
TO-92
SC-43
Note: Using continuously under heavy loads (e.g. the application of high
TOSHIBA
2-5F1B
temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the
Weight: 0.21 g (typ.)
reliability significantly even if the operating conditions (i.e.
operating temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(âHandling Precautionsâ/âDerating Concept and Methodsâ) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Electrical Characteristics (Ta = 25°C)
Characteristics
Collector cut-off current
Emitter cut-off current
Collector-emitter breakdown voltage
DC current gain
Collector-emitter saturation voltage
Base-emitter voltage
Transition frequency
Collector output capacitance
Noise figure
Symbol
Test Condition
ICBO
VCB = â120 V, IE = 0
IEBO
VEB = â5 V, IC = 0
V (BR) CEO IC = â1 mA, IB = 0
hFE
(Note)
VCE = â6 V, IC = â2 mA
VCE (sat)
VBE
fT
Cob
NF
IC = â10 mA, IB = â1 mA
VCE = â6 V, IC = â2 mA
VCE = â6 V, IC = â1 mA
VCB = â10 V, IE = 0, f = 1 MHz
VCE = â6 V, IC = â0.1 mA, f = 10 Hz,
RG = 10 kΩ
VCE = â6 V, IC = â0.1 mA, f = 1 kHz,
RG = 10 kΩ
VCE = â6 V, IC = â0.1 mA, f = 1 kHz,
RG = 100 Ω
Min Typ. Max Unit
â¯
⯠â0.1 μA
â¯
⯠â0.1 μA
â120 â¯
â¯
V
200
â¯
700
â¯
â¯
â0.3
V
⯠â0.65 â¯
V
⯠100 ⯠MHz
â¯
4.0
â¯
pF
â¯
â¯
6
â¯
â¯
2
dB
â¯
3
â¯
Note: hFE classification GR: 200~400, BL: 350~700
1
2007-11-01
|
▷ |