20FWJ2CZ47M_06 Datasheet, PDF (1/5 Pages) Toshiba Semiconductor – SWITCHING MODE POWER SUPPLY APPLICATION

20FWJ2CZ47M
TOSHIBA SCHOTTKY BARRIER RECTIFIER STACK SCHOTTKY BARRIER TYPE
20FWJ2CZ47M
SWITCHING MODE POWER SUPPLY APPLICATION
CONVERTER & CHOPPER APPLICATION
Unit: mm
• Peak Forward Voltage: VFM ≤ 0.47V
• Repetitive Peak Reverse Voltage: VRRM = 30V
• Average Output Rectified Current: IO = 20A
• Low Switching Losses and Output Noise.
ABSOLUTE MAXIMUM RATINGS (Ta = 25°C)
CHARACTERISTIC
SYMBOL
RATING
UNIT
Repetitive Peak Reverse Voltage
V_RRM
30
V
Average Output Rectified Current
I_O
20
A
Peak One Cycle Surge Forward
Current (Sine Wave)
I_FSM
200 (50Hz)
A
220 (60Hz)
Junction Temperature
Storage Temperature Range
Screw Torque
T_j
−40~125
°C
T_stg
−40~150
°C
―
0.6
N·m
JEDEC
JEITA
TOSHIBA
―
―
12-10C1A
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in
Weight: 2.0 g (typ.)
temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating
conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
ELECTRICAL CHARACTERISTICS (Ta = 25°C)
CHARACTERISTIC
SYMBOL
TEST CONDITION
Peak Forward Voltage
(Note 1)
Repetitive Peak Reverse Current
(Note 1)
Junction Capacitance
(Note 1)
Thermal Resistance
V_FM
I_RRM
C_j
R_{th (j−c)}
I_FM = 10A
V_RRM = Rated
V_R = 10V, f = 1.0MHz
Total DC, Junction to Case
Note 1: A value applied to one cell.
TYP. MAX UNIT
―
0.47
V
―
10
mA
680 ―
pF
―
2.7 °C / W
POLARITY
1
2006-11-10