10GWJ2C48C_06 Datasheet, PDF (1/5 Pages) Toshiba Semiconductor – SWITCHING MODE POWER SUPPLY APPLICATION

10GWJ2C48C,U10GWJ2C48C
TOSHIBA SCHOTTKY BARRIER RECTIFIER STACK SCHOTTKY BARRIER TYPE
10GWJ2C48C,U10GWJ2C48C
SWITCHING MODE POWER SUPPLY APPLICATION
CONVERTER & CHOPPER APPLICATION
• Repetitive Peak Reverse Voltage: V_RRM=40V
• Average Output Rectified Current: I_O=10A
• Low Switching Losses and Output Noise.
10GWJ2C48C
U10GWJ2C48C
Unit: mm
JEDEC
JEITA
TOSHIBA
―
―
12-10D1A
JEDEC
JEITA
TOSHIBA
―
―
12-10D2A
ABSOLUTE MAXIMUM RATINGS (Ta = 25°C)
CHARACTERISTIC
SYMBOL
RATING
UNIT
POLARITY
Repetitive Peak Reverse Voltage
VRRM
40
V
Repetitive Peak Reverse Surge
Voltage
(Note 1)
VRRSM
48
V
Average Output Rectified Current
IO
10
A
Peak One Cycle Surge Forward
Current (Sine Wave)
IFSM
100 (50Hz)
A
110 (60Hz)
Junction Temparature
Tj
−40~125
°C
Storage Temparature Range
Tstg
−40~150
°C
Note 1: Pulse Width (t_w) ^<= 500ns, duty (t_w / T) ^<= 1 / 25
Note 2: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
1
2006-11-10