XC6382 Datasheet, PDF (9/17 Pages) Torex Semiconductor – PFM CONTROLLED STEP UP DC/DC CONVERTERS

9$
4FSJFT
˙&MFDUSJDBM
$IBSBDUFSJTUJDT
XC6382A301MR VOUT=3.0V
Ta=25°C
PARAMETER
Output Voltage
SYMBOL
VOUT
CONDITIONS
L,SD,CL etc. connected
MIN TYP MAX UNITS
2.925 3.000 3.075 V
Maximum Input Voltage
VIN
10
V
Oscillation Start-up Voltage
VST
IOUT=1mA
0.80 0.90 V
Oscillation Hold Voltage
VHLD
IOUT=1mA
0.70
V
No-Load Input Current
IIN
IOUT=0mA(Note1)
4.6
9.3
µA
Supply Current 1 (Note 2)
IDD1
VIN=VOUT ✕ 0.95
19.7 39.4 µA
Supply Current 2
IDD2
VIN=VOUT+0.5V
2.1
4.2
µA
Lx Switch-On Resistance
RSWON
Same as IDD1. VLX=0.4V.
5.2
7.9
Ω
Lx Leakage Current
ILXL
No external components. VOUT=VLX=10V.
1.0
µA
Duty Ratio
DTY Same as IDD1. Measuring of Lx waveform. 70
75
80
%
Maximum Oscillation Frequency MAXFOSC
Same as IDD1. 75% duty.
85 100 115 kHz
4
Stand-by Current
ISTB
Same as IDD1.
Lx Limit Voltage
VLxLMT
Same as IDD1, FOSC > MAXFOSC ✕ 2
0.7
1.1
V
Efficiency
EFFI
L,SD,CL etc. connected
80
%
Measuring conditions: Unless otherwise specified, VIN=VOUT ✕ 0.6, IOUT=30mA. See Typical Application Circuits, Fig.1.
Note: 1. The Schottky diode (SD) must be type MA735, with reverse current (IR) <1.0µA at reverse voltage (VR)=10.0V.
2. "Supply current 1" is the supply current while the oscillator is continuously oscillating. In actual operation the oscillator periodically operates
which results in less average power consumption. The current actually provided by an external VIN source is represented by "No-Load Input
Current (IIN)".
XC6382A501MR VOUT=5.0V
Ta=25°C
PARAMETER
Output Voltage
SYMBOL
VOUT
CONDITIONS
L,SD,CL etc. connected
MIN TYP MAX UNITS
4.875 5.000 5.125 V
Maximum Input Voltage
VIN
10
V
Oscillation Start-up Voltage
VST
IOUT=1mA
0.80 0.90 V
Oscillation Hold Voltage
VHLD
IOUT=1mA
0.70
V
No-Load Input Current
IIN
IOUT=0mA(Note1)
5.3 10.6 µA
Supply Current 1 (Note 2)
IDD1
VIN=VOUT ✕ 0.95
31.7 63.4 µA
Supply Current 2
IDD2
VIN=VOUT+0.5V
2.4
4.8 µA
Lx Switch-On Resistance
RSWON
Same as IDD1. VLX=0.4V.
2.8
4.3
Ω
Lx Leakage Current
ILXL
No external components. VOUT=VLX=10V.
1.0 µA
Duty Ratio
DTY Same as IDD1. Measuring of Lx waveform. 70
75
80
%
Maximum Oscillation Frequency MAXFOSC
Same as IDD1. 75% duty.
85 100
115 kHz
Stand-by Current
ISTB
Same as IDD1.
Lx Limit Voltage
VLxLMT
Same as IDD1, FOSC > MAXFOSC ✕ 2
0.7
1.1
V
Efficiency
EFFI
L,SD,CL etc. connected
85
%
Measuring conditions: Unless otherwise specified, VIN=VOUT ✕ 0.6, IOUT=50mA. See Typical Application Circuits, Fig.1.
Note: 1. The Schottky diode (SD) must be type MA735, with reverse current (IR) <1.0µA at reverse voltage (VR)=10.0V.
2. "Supply current 1" is the supply current while the oscillator is continuously oscillating. In actual operation the oscillator periodically operates
which results in less average power consumption. The current actually provided by an external VIN source is represented by "No-Load Input
Current (IIN)".
495