XC6210_1 Datasheet, PDF (7/21 Pages) Torex Semiconductor – High Current, High Speed LDO regulators

XC6210
Series
■ELECTRICAL CHARACTERISTICS
●XC6210 series
PARAMETER
SYMBOL
CONDITIONS
MIN.
Output Voltage (*2), (*3)
Maximum Output Current
[VOUT(E)>1.6V]
Maximum Output
Current [VOUT(E)<1.5V]
Load Regulation
VOUT(E)
IOUTMAX
IOUTMAX
△VOUT
VIN=VOUT(T)+1.0V, IOUT=30mA
VCE=ON (VIN or VSS)
VOUT(T)<1.5V, IOUT=30mA
VCE=ON (VIN or VSS)
VIN=VOUT(T)+1.0V,
VCE=ON (VIN or VSS)
VIN=VOUT(T)+1.0V,
VCE=ON (VIN or VSS)
1mA<IOUT<100mA, VCE=ON(VIN or VSS)
x 0.98
(-30mV)
700
500
-
Dropout Voltage (*4)
Vdif1
Vdif2
IROUT=30mA, VCE=ON (VIN or VSS)
IROUT=100mA, VCE=ON (VIN or VSS)
Supply Current (A type)
VIN=VCE=VOUT(T)+1.0V
Supply Current (B type)
IDD
Supply Current (C type)
VIN=VCE=VOUT(T)+1.0V
-
VIN=VOUT(T)+1.0V, VCE=VSS
Supply Current (D type)
VIN=VOUT(T)+1.0V, VCE=VSS
-
Line Regulation
Input Voltage
△VOUT
△Topr･VOUT
VOUT(T)+1.0V≦VIN≦6.0V
When VOUT(T)≧4.5V, 5.5V≦VIN≦6.0V
-
VCE=ON (VIN or VSS), IOUT=30mA
VIN
-
1.5
TYP.
VOUT(T)
VOUT(T)
-
-
15
E-1
E-2
E-3
35
E-3
35
0.01
-
MAX.
x 1.02
(+30mV)
-
-
60
55
55
0.20
6.0
Ta=25℃
UNITS CIRCUIT
V
①
mA ①
mV ①
mV ①
μA ②
%/V ①
V
-
Output Voltage
△VOUT
IOUT=30mA, VCE=ON (VIN or VSS)
Temperature Characteristics △Topr・△VOUT
-40℃≦Topr≦85℃
-
±100
-
ppm/
℃
①
VIN=[VOUT(T)+1.0]VDC+0.5Vp-pAC
When VOUT(T)>4.75V
Ripple Rejection Rate
PSRR
→ VIN=5.75VDC+0.5Vp-pAC
-
60
-
dB
③
VCE=ON (VIN or VSS), IOUT=30mA,
f=1kHz
Current Limiter
[VOUT(E)>1.6V]
Current Limiter
[VOUT(E)<1.5V]
Ilim
VIN=VOUT(T)+1.0V, VCE=ON(VIN or VSS) 700
800
-
mA ①
Ilim
VIN=VOUT(T)+1.0V, VCE=ON(VIN or VSS) -
800
-
Short-Circuit Current
Ishort VIN=VOUT(T)+1.0V, VCE=ON(VIN or VSS) -
50
-
mA ①
CE “High” Level Voltage
CE “Low” Level Voltage
CE “High” Level
Current (A type)
CE “High” Level
Current (B / C / D type)
CE “Low” Level Current
(C type)
CE “Low” Level Current
(A / B / D type)
VCEH
VCEL
ICEH
ICEL
-
-
VIN=VCE=VOUT(T)+1.0V
VIN=VOUT(T)+1.0V, VCE=VSS
1.3
-
-
-
E-4
-
- 0.10
-
E-5
-
- 0.10
-
6.0
V
①
0.25
E-4
μA ①
0.10
E-5
μA ①
0.10
NOTE:
*1: Unless otherwise stated, VIN=VOUT(T)+1.0V
*2: VOUT(T)=Specified output voltage
*3: VOUT(E)=Effective output voltage
(i.e. the output voltage when " VOUT(T)+1.0V" is provided while maintaining a certain IOUT value).
*4: Vdif ={VIN1^(*6)-VOUT1^(*5) }
*5: A voltage equal to 98% of the output voltage whenever a stabilized VOUT1=IOUT{VOUT(T)+1.0V} is input.
*6: VIN1= the input voltage when VOUT1, which appears as input voltage is gradually decreased.
*7: VOUT(T)<1.50V
MIN. : VOUT(T) - 30mV, MAX. : VOUT(T) +30mV
*8: CE conditions:
XC6210A / B type: ON=VIN, OFF=VSS
XC6210C / D type: ON=VSS, OFF=VIN
7/21