XC62RP Datasheet, PDF (6/14 Pages) Torex Semiconductor – Positive Voltage Regulators for Voltage Reference Source

XC62RP Series
■TYPICAL APPLICATION CIRCUIT
■NOTES ON USE
1. Please use with a load capacitance, CL, of less than 0.1μF and in 0.01μF steps.
2. Since short-circuit protection is not built-in, the IC may be damaged by rush current should the output pin be
connected to the Ground pin.
3. When the load capacitance, CL, is small, overshoot will be produced when the power is switched on.
4. As the output pin's current is only a few μA, output voltage will increase should output be pulled-up by means
of a resistor.
■TEST CIRCUITS
Circuit 1
Circuit 2
6/14