XC6201_2 Datasheet, PDF (6/24 Pages) Torex Semiconductor – Positive Voltage Regulators

XC6201 Series
■TYPICAL APPLICATION CIRCUIT
(Tantalum)
(Tantalum)
With the XC6201 series regulator, in order to ensure the stabilized output voltage, we suggest that an output capacitor (CL) of
1μF or more be connected between the output pin (VOUT) and the VSS pin. For using low ESR capacitor (e.g. ceramic
capacitors), please make sure that the output voltage is more than 1.7V. When the output voltage is from 1.3V to 1.6V, the
output capacitor should be a tantalum capacitor with a capacitance of 2.2μF. We also suggest an input capacitor (CIN)
should be connected between the VIN and the VSS in order to stabilize input power source.
OUTPUT VOLTAGE
1.3V～1.6V
1.7V～6.0V
CIN
≧1.0μF
≧1.0μF
CL (TANTALUM)
≧2.2μF
≧1.0μF
CL (LOW ESR)
－
≧1.0μF
V_IN=1.8V~10V,V_OUT=1.7~6.0V
C_IN=1.0μF(Ceramic),C_L=1.0μF(ceramic)
6/24