|
XCM406 Datasheet, PDF (1/20 Pages) Torex Semiconductor – High Current High Speed Dual LDO Regulator | |||
|
XCM406 Series
ETR2406-003
High Current High Speed Dual LDO Regulator
ËGENERAL DESCRIPTION
The XCM406 series is a high current, dual LDO regulator in an ultra small USP-12B01 package which measures just 2.8mm x
2.8mm. The IC is basically two XC6210 high speed CMOS LDOs which are precise, low noise, high current, regulators
consisting of a voltage reference, an error amplifier, a current limiter and phase compensation circuit plus a driver transistor. The
low ON resistance of the built-in driver transistor means that batteries can be used to a minimal input-output voltage differential
and can therefore be used for a longer time. The series can be used with low ESR ceramic capacitors and output voltages are
selectable in 0.1V increments within a range of 0.8V to 5.0V per channel. The fold-back current limit circuit also operates as the
output current limiter and the output pin protector.
The IC can be placed in stand-by mode via the CE function so that power consumption is greatly reduced.
ËAPPLICATIONS
ËMobile phone
ËBluetooth equipment
ËPortable AV equipment
ËPortable gaming equipment
ËFEATURES
Maximum Output Current
Dropout Voltage
Operating Voltage Range
Output Voltage Setting Range
Accuracy
Low Power Consumption
High Ripple Rejection
Operating Temperature Range
Package
: ʾ700mA (TYP.: 800mA limit)
(1.6V<VOUT(T) <5.0V)
: 50mV@IOUT=100mA
: 1.5V ~ 6.0V
: 0.8V ~ 5.0V (0.1V increments)
: + 2%
: 35ÐA (TYP.)
: 60dB @ 1kHz
: - 40 OC ~ 85 OC
: USP-12B01
ËTYPICAL APPLICATION CIRCUIT
VOUT1
(TOP VIEVWO)UT2
* The dotted lines in the circuit indicates the connection
using through-holes at the backside of the PC board
1:VIN1
2:NC
3:VSS1
4:VIN2
5:NC
6:VSS2
VIN
CE
XC6210
VSS
VOUT
VIN
CE
XC6210
VSS
VOUT
12:EN1
11:NC
10:VOROUTU1T1
9:EN2
8:NC
7:VOROUTU2T2
ç
(TOP VIEW)
1/20
|
▷ |