XC6367_1 Datasheet, PDF (1/28 Pages) Torex Semiconductor – PWM Controlled, PWM/PFM Switchable Step-Up DC/DC Controllers

XC6367/XC6368 Series
PWM Controlled,PWM/PFM Switchable Step-up DC/DC Controllers
ETR0401_001
☆GO-Compatible
■GENERAL DESCRIPTION
The XC6367/68 series are multi-functional step-up DC/DC converter controllers with built-in high speed, low ON resistance
drivers.
High efficiency is possible using an externally connected transistor, coil, diode and capacitor.
Output voltage is selectable in 100mV increments within a range of 1.5V ~ 6.5V (±2.5%). For output voltages outside this
range, we recommend FB version, which has a 1.0V internal reference voltage. Using the FB version, the required output
voltage can be set-up using 2 external resistors.
With a 300kHz oscillation frequency, the size of the external components can be reduced.
Control switches from PWM to PFM during light loads with the XC6368 (PWM/PFM switchable) and the series is highly
efficient from light loads to large output currents.
Soft start time of XC6367/68A, B, and E series is internally set to 10msec and XC6367/68C, D, and F series regulate soft-start
time by connecting resistors and capacitors externally.
During stand-by (CE pin "Low"), supply current is reduced to less than 0.5μA.
■APPLICATIONS
●Electronic information organizers
●Palmtops
●Cellular and portable phones
●Portable audio systems
●Various multi-function power supplies
■FEATURES
Input Voltage Range : 0.9V ~ 10V
Operating Voltage Range : 2.0V ~ 10V
Output voltage Range : 1.5V ~ 6.5V programmable in
100mV increments (±2.5%)
Oscillation Frequency : 300kHz, 100kHz (±15%)
Custom products for
180kHz, 500kHz
Output Current
: More than 200mA
High Efficiency
Stand-by capability
(VIN=1.8V, VOUT=3.3V)
: 84% (TYP.)
: ISTB=0.5μA (MAX.)
Selection
: Soft-start set-up external
Output voltage set-up internal (VOUT)
Output voltage set-up external (FB)
PWM/PFM Switching Control (XC6368)
Package
: SOT-25
■TYPICAL APPLICATION CIRCUIT ^{■ TYPICAL PERFORMANCE}
CHARACTERISTICS
1/28