XC2173_1 Datasheet, PDF (1/10 Pages) Torex Semiconductor – ICs for use with Crystal Oscillators (PLL built - in)

XC2173 Series
ICs for use with Crystal Oscillators (PLL built - in)
ETR1504_001
■GENERAL DESCRIPTION
The XC2173 series are high frequency, low power consumption CMOS ICs with built-in crystal oscillator, divider and clock
multiplier PLL circuits. Output is selectable from any one of the following values for f0: f0 x 5, f0 x 6, f0 x 7, f0 x 8, f0/2, f0/4,
f0/8. With an oscillation capacitor & oscillation feedback resistor built-in, a stable oscillator circuit can be put together using
only an external crystal oscillator.
By connecting an external standard clock, the above mentioned output frequencies can be achieved.
■APPLICATIONS
●Crystal oscillation modules
●Computer, DSP clocks
●Communication equipment
●Various system clocks
■FEATURES
Oscillation Frequency
: 10MHz ~ 25MHz
Divider Ratio
: f0/2, f0/4, f0/8
Multiplier
: f0 x 5, f0 x 6, f0 x 7, f0 x 8
Output
: 3-State
Operating Voltage Range : 3.3V ±10% and 5.0V ±10%
Small Consumption Current: Stand-by function included*
* Oscillation continues in stand-by
CMOS
Output Frequency
: 80MHz ~ 160MHz (5.0V)
: 50MHz ~ 125MHz (3.3V)
Divider Circuit & PLL Circuit Built-In
Oscillation Capacitor & Oscillation Feedback Resistor Built-In
Ultra Small Package
: SOT-26
■PIN CONFIGURATION
■INH, Q0 PIN FUNCTION
/INH
“H” or OPEN
Q0
Divider / Multiplier Output
"H" = High level
"L" = Low level
■PIN ASSIGNMENT
PIN
PIN NAME
NUMBER
1
/INH
2
XT
3
VSS
4
Q0
5
VDD
6
/XT
FUNCTION
Stand-by control*
Crystal Oscillator Connection (Input)
GND
Clock Output
Power Supply
Crystal Oscillator Connection
(Output) /Standard Clock Input
* Stand-by control pin has a pull-up resistor built-in.
“L (Stand-by)
High Impedance
1/10