|
XC2163_12 Datasheet, PDF (1/9 Pages) Torex Semiconductor – ICs for use with 3rd Overtone Crystal Oscillators | |||
|
XC2163 Series
ICs for use with 3rd Overtone Crystal Oscillators
ETR1403_001a
ç
ç ËGENERAL DESCRIPTION
ç The XC2163 series are high frequency, low current consumption CMOS ICs with built-in crystal oscillator and divider circuits.
ç Output is selectable from any one of the following values for f0: f0/1, f0/2, f0/4, f0/8.
ç With oscillation capacitors and a feedback resistors built-in, it is possible to configure a stable 3rd overtone oscillator using
ç
ç only an external crystal oscillator.
ç Also available is an external oscillation capacitor/external oscillation feedback resistor type, which makes oscillation
ç frequency control possible.
çç
ç ËAPPLICATIONS
ËFEATURES
ç
ç
ËCrystal
Oscillation
Modules
ç ËComputer, DSP Clocks
ç
ç ËCommunication Equipment
ç
ç ËVarious System Clocks
ç
ç
ç
Oscillation Frequency
(3rd Overtone)
Divider Ratio
Output
: 40MHz ~ 125MHz
(Rf, Cg, Cd internal; 5.0V)
: 57MHz ~ 125MHz
(Rf, Cg, Cd internal; 3.3V)
: 20MHz ~ 125MHz
(Rf, Cg, Cd external)
: Selectable from f0/1, f0/2,
f0/4, f0/8.
: 3-State
ç
Operating Voltage Range : 3.3V ʶ10%, 5.0V ʶ10%
ç
Low Current Consumption : Stand-by function included *
ç
CMOS
ç
Built-in Oscillation Capacitor
ç
Built-in Oscillation Feedback Resistor
ç
Package
: SOT-26
ç
ç
Environmentally Friendlyç : EU RoHS Compliant, Pb Freeçç
* Oscillation continues in stand-by mode
ËPIN CONFIGURATION
ËPIN ASSIGNMENT
PIN
NUMBER
1
PIN NAME
/INH
2
XT
3
VSS
4
Q0
5
VDD
6
/XT
FUNCTION
Stand-by Control*
Crystal Oscillator Connection
(Input)
GND
Clock Output
Power Supply
Crystal Oscillator Connection
(Output)
* Stand-by control pin has a pull-up resistor built-in.
Ë/INH, Q0 PIN FUNCTION
/INH
"H" or OPEN
"L"(Stand-by)
Q0
Divider Output
High Impedance
"H" = High Level
"L" = Low Level
1/9
|
▷ |