TP03AZ Datasheet, PDF (3/3 Pages) Toppower Electronic Technology Limited – 3W 2.5KV Isolation Wide Input AC/DC Converters

MECHANICAL DIMENSIONS
TP03AZ Series
Pin
Function
1
AC
2
AC
3
-Vo
4
+Vo
* Pin not fitted on single output variants
Units:mm
Block Diagram
Tolerance:±0.2mm
C1, C2, C3, C4, C5 capacitor values refer to parameter table
USING ATTENTIONS
1.The output filter capacitor C4 is electrolytic capacitor, recommend using of high frequency and low resistance of electrolytic capacitors，
the capacity and the current flowing-through need refer to the technical specifications provided by the manufacturer. Capacitance voltage
derating is greater than 80% .C5 is use to remove high frequency noise.TVS D1 is used for protecting flow-up circuit (when module be
abnormal)and recommended to use.
2.EMC filter used in the dashed box is to meet the higher requirements，if it is used in general applications，it can be omitted.
3.Our company makes the circuit(C1,C2,C3,NF) in the dashed box into products，and named：FA01 and can be used with switching power supply.
STEMPERATURE DERATING
www.gztoppower.con
TEL:[phone]
Email:[e-mail]
Page 3 / 3