TTP224N-BSB Datasheet, PDF (1/9 Pages) Tontek Design Technology – 4 KEY TOUCH PAD DETECTOR IC

Preliminary
TTP224N-BSB
TonTouch^TM
4 KEY TOUCH PAD DETECTOR IC
GENERAL DESCRIPTION
The TTP224N-BSB TonTouch^TM IC is capacitive sensing design specifically for touch pad
controls. The device built in regulator for touch sensor. Stable sensing method can cover diversity
conditions. Human interfaces control panel links through non-conductive dielectric material. The
main application is focused at replacing of the mechanical switch or button. The ASSP can
independently handle the 4 touch pads with 4 direct output pins.
FEATURES
 Operating voltage 2.4V~5.5V
 Built-in regulator
 Operating current, @VDD=3V no load
At low power mode typical 2.5uA, At fast mode typical 9uA
 @VDD=3V operating voltage :
The response time about 60mS at fast mode,160mS at low power mode
 Sensitivity can adjust by the capacitance(0~50pF) outside for each touch pad
 Provides Fast mode and Low Power mode selection by pad option(LPMB pin)
 Provides direct mode or toggle mode、CMOS output or open drain output、
active high or active low by pad option(TOG/AHLB/OD pin).
 Have the maximum on time 16sec/infinite by pad option(MOT0 pin)
 After power-on have about 0.5sec stable-time, during the time do not touch the key pad,
and the function is disabled
 Auto calibration for life, and the re-calibration period is about 4.0sec, when key has not be
touched.
APPLICATION
 Wide consumer products
 Button key replacement
2014/06/05
Page 1 of 9
Ver :3.1