TK15406 Datasheet, PDF (1/8 Pages) TOKO, Inc – 75 OHM VIDEO LINE DRIVER

TK15406
FEATURES
s Internal 75 Ω Driver
s Active High ON/OFF Control with Internal Pull-up
s Very Low Standby Current (typ. I_STBY ≤ 25 µA)
s Very Small SOT23-6 Package
s Single +5 V Power Supply Operation
75 Ω VIDEO LINE DRIVER
APPLICATIONS
s Video Equipment
s Digital Cameras
s CCD Cameras
s TV Monitors
s Video Tape Recorders
s LCD Projectors
DESCRIPTION
Operating from a single +5 V supply, the TK15406 is a
single-channel video line driver IC that takes a standard
video analog input and provides a buffered analog output
for driving a 150 Ω load. The standard video input signal
(1 V_P-P typical) is internally biased at 2.5 V and amplified
6 dB to produce 2 V_P-P (typical) into a series 75 Ω resistor
and 75 Ω cable load. During standby (Pin 1 grounded), the
TK15406 consumes only 120 µW of power. Nominal
power dissipation (no input) is typically 32 mW.
The TK15406M is available in the very small SOT23-6
surface mount package.
ORDERING INFORMATION
TK15406M
Tape/Reel Code
TAPE/REEL CODE
TL: Tape Left
January 2000 TOKO, Inc.
TK15406
STANDBY
01S
OUTPUT
N/C
VCC
GND
INPUT
BLOCK DIAGRAM
VCC
BIAS
5 kΩ
STANDBY
5 kΩ
GND
Page 1