TK15405 Datasheet, PDF (1/8 Pages) TOKO, Inc – OPERATIONAL AMPLIFIER WITH 75 OHM DRIVER

TK15405
OPERATIONAL AMPLIFIER WITH 75 Ω DRIVER
FEATURES
s Fixed Gain (6 dB typ.)
s Internal 75 Ω Driver
s Active High ON/OFF Control with Internal Pull-up
s Very Low Standby Current (typ. I_STBY ≤ 25 µA)
s Very Small Output Capacitor Using SAG Function Pin
s Very Small SOT23-6 Package
s Single +5 V Power Supply Operation
APPLICATIONS
s Video Equipment
s Digital Cameras
s CCD Cameras
s TV Monitors
s Video Tape Recorders
s LCD Projectors
DESCRIPTION
Operating from a single +5 V supply, the TK15405 is a
single-channel video line driver IC that takes a standard
video analog input and provides a buffered analog output
for driving a 150 Ω load. The standard video input signal
(1 V_P-P typical) is internally clamped at 1.25 V and amplified
6 dB to produce 2 V_P-P (typical) into a series 75 Ω resistor
and 75 Ω cable load. The internal 1.5 k SAG function
resistor provides gain compensation for low frequency
signals. During standby (Pin 1 grounded), the TK15405
consumes only 120 µW of power. Nominal power
dissipation (no input) is typically 38 mW.
The TK15405M is available in the very small SOT23-6
surface mount package.
ORDERING INFORMATION
TK15405M
Tape/Reel Code
TAPE/REEL CODE
TL: Tape Left
TK15405
STANDBY
01S
OUTPUT
SAG
VCC
GND
INPUT
BLOCK DIAGRAM
VCC
Clamp
1.5 kΩ
5 kΩ
STANDBY
5 kΩ
GND
January 2000 TOKO, Inc.
Page 1