MBH12282C Datasheet, PDF (1/1 Pages) TOKO, Inc – Magnetically shielded

Ferrite Inductors
フェライトインダクタ
MBH12282C
Inductance Range: 2.0~1000µH
Recommended patterns
推奨パターン図
(Unit: mm)
(Unit: mm)
FEATURES 特長
• AEC-Q200 Compliant.
• 12.5× 12.5mm Max. square, 8.5mm Max. height.
• Magnetically shielded.
• AEC-Q200準拠
• 12.5 × 12.5mm角Max. 高さ8.5mm Max.
• 閉磁路構造
STANDARD PART NUMBERS 標準品一覧
TYPE MBH12282C (Quantity/reel; 500 PCS)
品番
インダクタンス⁽¹⁾ 許容差
直流抵抗⁽²⁾
Part
Number
Inductance⁽¹⁾
(µH)
Tolerance
(%)
DC
Resistance⁽²⁾
(mΩ)
Tolerance ±
20%
* MBH12282C-2R0NA=P3
2.0
±30
9.1
* MBH12282C-3R9NA=P3
3.9
* MBH12282C-4R7NA=P3
4.7
MBH12282C-6R8NA=P3
6.8
±30
12
±30
13
±30
15
MBH12282C-100MA=P3
10
±20
18
* MBH12282C-150MA=P3
15
±20
21
* MBH12282C-220MA=P3
22
* MBH12282C-330MA=P3
33
MBH12282C-470MA=P3
47
±20
29
±20
47
±20
66
MBH12282C-680MA=P3
68
±20
83
MBH12282C-820MA=P3
82
MBH12282C-101MA=P3
100
* MBH12282C-151MA=P3
150
* MBH12282C-221MA=P3
220
MBH12282C-331MA=P3
330
±20
91
±20
110
±20
160
±20
250
±20
350
* MBH12282C-471MA=P3
470
±20
460
* MBH12282C-681MA=P3
MBH12282C-102MA=P3
* Under development
680
1000
±20
±20
720
1050
直流重畳許容電流⁽³⁾
Inductance
Decrease Current⁽³⁾
(A) Max.(Typ.)
ΔL/L=10%
13 (18)
9.1 (13)
7.9 (11)
7.0 (10)
5.7 (8.2)
4.4 (6.3)
3.8 (5.5)
3.0 (4.3)
2.5 (3.6)
2.1 (3.0)
1.9 (2.8)
1.7 (2.5)
1.4 (2.0)
1.1 (1.6)
0.9 (1.3)
0.84 (1.2)
0.66 (0.95)
0.56 (0.81)
温度上昇許容電流⁽³⁾
Temperature
Rise Current⁽³⁾
∆T=40°C
(A) Max. (Typ.)
7.3 (9.2)
6.2 (7.8)
5.9 (7.4)
5.7 (7.2)
5.3 (6.3)
4.7 (5.6)
4.0 (4.8)
3.0 (3.6)
2.6 (3.1)
2.2 (2.7)
2.2 (2.6)
1.9 (2.3)
1.6 (1.9)
1.2 (1.5)
1.1 (1.3)
0.93 (1.1)
0.76 (0.90)
0.59 (0.70)
1) Inductance is measured with a LCR meter 4284A(Agilent
Technologies) or equivalent. Test frequency at 100kHz
(2) DC resistance is measured with 34420A (Agilent Technologies) or
3541(HIOKI). (Reference ambient temperature 25°C)
(3) Maximum allowable DC current is that which causes a 10%
inductance reduction from the initial value, coil temperature to rise
by 40°C, whichever is smaller.
(Reference ambient temperature 25°C)
(1) インダクタンスはLCRメータ4284A(Agilent Technologies)または
同等品により測定する。測定周波数は100kHz。
(2) 直流抵抗は測定器34420A（Agilent Technologies）または3541
（HIOKI）と同等品により測定する。（周囲温度25°C）
(3) 最大許容電流は､直流重畳電流を流した時インダクタンスの値が
初期値より10％減少する直流電流値、または直流電流により、
コイルの温度が40°C上昇の何れか小さい値。
(周囲温度25°C )