English
Language : 

HEAWS Datasheet, PDF (1/1 Pages) TOKO, Inc – High quality sound by use of oxgen free copper wire
HEAWS
Inductance Range: 10H2
HEAWS
Inductors for Automotive Digital Amplifier
車載対応デジタルオーディオアンプ用インダクタ
Recommended patterns
推奨パターン図
PIN connections
接続図
FEATURES 特長
 Less space by "2 coils in 1unit" structure
 High reliability for automotive application.
 Pin coplanarity is less than 0.1mm.
 High quality sound by use of oxgen free copper wire.
 Suitable for large current.
 AEC-Q200 compliant.
STANDARD PART NUMBERS 標準品一覧
(Unit: mm)
(Unit: mm)
 2in1構造による省スペース
 車載機器向け高信頼性
 端子平坦性0.1mm以下を実現
 無酸素銅線採用による高音質対応
 大電流対応
 AEC-Q200準拠
(TOP VIEW)
TYPE HEAWS (2coils in 1unit)
品番
インダクタンス(1) 許容差
Part
Number
Inductance(1)
L(H)
Tolerance
(%)
1211EA-1004=P3
10.0
 20
直流抵抗(2)
DC
Resistance(2)
(m) Max.
(Typ. Value at room temp.)
25.0 (22.0)
直流重畳許容電流(3)
Inductance
Decrease Current(3)
(A) Max.
L
L
=25%
(Typ. Value at room temp.)
5.0 (6.4)
温度上昇許容電流(4)
Temperature
Rise Current(4)
T=40C
(A) Max
(Typ. Value at room temp.).
2.8 (3.6)
(1) Inductance is measured with a LCR meter 4284A (Agilent
Technologies) or equivalent.
Test frequency at 100kHz.
(2) DC resistance is measured with a Digital Multimeter TR6871
(Advantest) or equivalent.
(3) Inductance decrease current based upon 25% inductance
reduction from the initial value.
(4) Temperature rise current is that which coil temperature rises by
40°C. (Two built-in coils are connected in series, when
measuring.)
(1) インダクタンスはLCRメータ4284A(Agilent Technologies)また
は同等品により測定する。
測定周波数は100kHz。
(2) 直流抵抗値はデジタルマルチメータTR6871(Advantest)又は同
等品にて測定する。
(3) 直流重畳許容電流:直流電流を流した時インダクタンスの値が初
期値より25%減少する電流値。
(4) 温度上昇許容電流は直流電流を流した時に40°C温度が上昇する
電流値(内蔵された2つのコイルは直列接続し通電)。
※The electrical characteristics specification above shall be achieved in 25°C. ※上記の電気的性能規格は25℃の保証となります。
These Inductors are prepared for LPF at output step of digital audio amplifier.
High Sound quality, low distortion, low heat generation by the use of magnetic material suitable for
degital audio amplifier, and superb magnetic saturation characteristics
デジタルアンプの出力段のローパスフィルタ用インダクタです。
デジタルアンプ用に最適な磁性材料を使用、優れた磁気飽和特性により、高音質、低歪率、低発熱
を実現しました。