OAR1R01JP Datasheet, PDF (25/58 Pages) Token Electronics Industry Co., Ltd. – Chip Current Sense / Open-Air Current Shunts / Axial Current Sense Resistors

TOKEN
Power Derating Curve
TCS Current Sense Chip Resistors
100
80
60
40
30
20
0
20 40 60 70 80 100 120 140 155
Ambient Temperature (°C)
Environmental Characteristics
Item
Temperature Coefficient of
Resistance
Short Time Overload
Specification
As Spec
±0.5%
Dielectric Withstand Voltage by Type
Insulation Resistance
>1000MΩ
Thermal Shock
±0.5%
Load Life
±1%
Humidity (Steady State) ±0.5%
Resistance to dry heat
±0.5%
Low Temperature Operation ±0.5%
Bending Strength
As Spec
Solderability
95%min coverage
Resistance to Soldering Heat ±0.5%
Note: Storage Temperature: 25±3°C; Humidity: <80%RH
Test Method
MIL-STD-202F Method 304
+25/-55/+25/+125/+25°C
JIS-C-5202-5.5
RCWV*2.5 or Max Overloading Voltage 5seconds
MIL-STD-202F Method 301
Apply Max Overload Voltage for l minute
MIL-STD-202F Method 302
Apply 100VDC for 1minute
MIL-STD-202F Method 107G
-55°C~150°C, 100cycles
MIL-STD-202F Method 108A
RCWV, 70°C, 1.5 hours on ,
0.5 hours off , Total 1000~1048 hours
MIL-STD-202F Method 103B
40°C, 90~95%RH, RCWV 1.5 hours ON,
0.5 hours OFF, total 1000 ~ 1048 hours
JIS-C-5202-7.2
96hours @ +155°C without load
JIS-C-5202-7.1
1hour, -65°C followed by 45minutes of RCWV
JIS-C-5202-6.1.4
Bending Amplitude 3mm for 10seconds
MIL-STD-202F Method 208H
245°C±5°C, 2±0.5 (sec)
MIL-STD-202F Method 210E
260±5°C, 10±1 second
Version 2010
http://www.token.com.tw/
rfq token.com.tw
23 of 56