I7511N Datasheet, PDF (1/1 Pages) Taiwan Memory Technology – 1.25Gbps FTTX Laser Diode Driver/Limiting Amplifier

tm TE
CH
Create i7511N
i7511N
1.25Gbps FTTX Laser Diode Driver/Limiting Amplifier
General Description
The i7511N is an integrated burst-mode/continuous mode laser driver and continuous mode
Limiting amplifier that operates at data rates from 155Mbps up to 1.25Gbps. The laser driver accepts
either positive-referenced emitter coupled logic (PECL) or current-mode logic (CML) data inputs and
provides bias and modulation current for the laser diode. The device can switch the laser diode from a
completely dark (off) condition to a full (on) condition (with proper bias and modulation currents) in
less than 3ns. The i7511N incorporates DC-coupling between laser driver and laser diode.
A digital automatic power-control (APC) loop is provided to maintain the average optical power
over the full temperature range.
The receiver also includes a programmable signal-level detector, allowing the user to set threshold
at which the PECL outputs are enabled. Typically 2.5 dB (Optical) of hysteresis is provided to prevent
chattering when signal level is close to the threshold.
LOS and JAM can be used to implement a squelch function, which gives fixed logic levels at data
outputs when the input signal is below the programmed threshold. The i7511N has CMOS status
outputs (pins LOS).
The i7511N is packaged in a small, 32-pin, 5mm *5mm thin QFN package and consumes only 330mW
(typ), excluding bias and modulation currents.
Applications
APON and GEPON Upstream Transmitters
Passive Optical Network (PON) Transmitters
Fiber-to-the-Home(FTTH) and Fiber-to-the-Premises (FTTP)
Broadband Access Systems
Features
Integrate Laser diode driver and Limiting Amplifier
Operation data rate 155Mbps and 1.25Gbps
Programmable Modulation Current from 3mA to 80mA (DC-Coupled)
Programmable modulation current with temperature compensation
Programmable Bias Current from 1mA to 80mA
Limiting Amplifier includes integrated DC offset cancellation circuit
Polarity Control for limiting Amplifier Data path and Driver Disable input
Programmable chatter-free signal level detector
4 mV input sensitivity (differential).
TM Technology Inc.