CC1110F32RHHR Datasheet, PDF (98/249 Pages) Texas Instruments – Low-Power SoC (System-on-Chip) with MCU, Memory, Sub-1 GHz RF Transceiver, and USB Controller

CC1110Fx / CC1111Fx
P2DIR (0xFF) - Port 2 Direction
Bit Field Name Reset R/W Description
7:6 PRIP0[1:0] 00
R/W Port 0 peripheral priority control. These bits shall determine the order of
precedence in the case when PERCFG assigns two peripherals to the same pins
00 USART0 - USART1
01 USART1 - USART0
10 Timer 1 channels 0 and 1 - USART1
11 Timer 1 channel 2 - USART0
5
0
R0 Not used
4:0 DIRP2_[4:0] 00000 R/W P2_4 to P2_0 I/O direction
0 Input
1 Output
P0INP (0x8F) - Port 0 Input Mode
Bit Field Name Reset R/W Description
7:0 MDP0_[7:0] 0x00 R/W P0_7 to P0_0 I/O input mode
0 Pull-up / pull-down
1 Tristate
P1INP (0xF6) - Port 1 Input Mode
Bit Field Name Reset R/W Description
7:2 MDP1_[7:2] 00000 R/W P1_7 to P1_2 I/O input mode, note that P1_1 and P1_0 do not have pull capability
0
0 Pull-up / pull-down
1 Tristate
1:0
00
R0 Not used
P2INP (0xF7) - Port 2 Input Mode
Bit Field Name Reset R/W Description
7
PDUP2
0
R/W Port 2 pull-up/down select. Selects function for all Port 2 pins configured as pull-
up/pull-down inputs.
0 Pull-up
1 Pull-down
6
PDUP1
0
R/W Port 1 pull-up/down select. Selects function for all Port 1 pins configured as pull-
up/pull-down inputs, except for P1_0 and P1_1, which do not have pull-up/down
capability.
0 Pull-up
1 Pull-down
5
PDUP0
0
R/W Port 0 pull-up/down select. Selects function for all Port 0 pins configured as pull-
up/pull-down inputs.
0 Pull-up
1 Pull-down
4:0 MDP2_[4:0] 00000 R/W P2_4 to P2_0 I/O input mode
0 Pull-up / pull-down
1 Tristate
SWRS033H
Page 98 of 246