TMS570LS0914 Datasheet, PDF (94/159 Pages) Texas Instruments – 16- and 32-Bit RISC Flash Microcontroller

TMS570LS0914
SPNS225C – JUNE 2013 – REVISED SEPTEMBER 2015
www.ti.com
Table 7-2. Switching Characteristics for Output Timings versus Load Capacitance (C_L) (continued)
Parameter
MIN
MAX
Unit
Rise time, t_r
Selectable 8mA / 2mA-z
pins
(see Table 4-40)
8mA mode
CL = 15 pF
CL = 50 pF
CL = 100 pF
2.5
ns
4
7.2
CL = 150 pF
12.5
Fall time, t_f
CL = 15 pF
CL = 50 pF
2.5
ns
4
CL = 100 pF
7.2
CL = 150 pF
12.5
Rise time, t_r
2mA-z mode
CL = 15 pF
CL = 50 pF
8
ns
15
CL = 100 pF
23
CL = 150 pF
33
Fall time, t_f
CL = 15 pF
CL = 50 pF
8
ns
15
CL = 100 pF
23
CL = 150 pF
33
Output
t_r
V_OL
V _OH
t_f
V_OH
V_OL
Figure 7-2. CMOS-Level Outputs
V_CCIO
0
Table 7-3. Timing Requirements for Outputs⁽¹⁾
Parameter
MIN
MAX
UNIT
t_{d(parallel_out)}
Delay between low to high, or high to low transition of general-purpose output signals
that can be configured by an application in parallel, e.g. all signals in a GIOA port, or
all N2HET1 signals, etc.
6
ns
(1) This specification does not account for any output buffer drive strength differences or any external capacitive loading differences. Check
Table 4-40 for output buffer drive strength information on each signal.
94
Peripheral Information and Electrical Specifications
Copyright © 2013–2015, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: TMS570LS0914