|
CC2420RTCR Datasheet, PDF (9/94 Pages) Texas Instruments – 2.4 GHz IEEE 802.15.4 / ZigBee-ready RF Transceiver | |||
|
◁ |
CC2420
6 Electrical Specifications
Measured on CC2420 EM with transmission line balun, TA = 25 ï°C, DVDD3.3 and VREG_IN = 3.3 V, internal
voltage regulator used if nothing else stated.
6.1 Overall
Parameter
RF Frequency Range
Min.
2400
Typ.
Max. Unit
2483.5 MHz
Condition / Note
Programmable in 1 MHz steps, 5
MHz steps for compliance with
[1]
6.2 Transmit Section
Parameter
Transmit bit rate
Min.
250
Typ.
Max.
250
Unit
kbps
Condition / Note
As defined by [1]
Transmit chip rate
2000
2000 kChips/s As defined by [1]
Nominal output power
-3
0
Programmable output power range
24
dBm
dB
Delivered to a single ended 50 ï
load through a balun.
[1] requires minimum â3 dBm
The output power is
programmable in 8 steps from
approximately â24 to 0 dBm.
Harmonics
2nd harmonic
3rd harmonic
-44
dBm
Measured conducted with 1 MHz
resolution bandwidth on
-64
dBm
spectrum analyser. At max output
power delivered to a single
ended 50 ï load through a balun.
See page 54.
Spurious emission
30 - 1000 MHz
1â 12.75 GHz
1.8 â 1.9 GHz
5.15 â 5.3 GHz
Error Vector Magnitude (EVM)
Optimum load impedance
-56
-44
-56
-51
11
95
+ j187
dBm
dBm
dBm
dBm
%
ï
Maximum output power.
Complies with EN 300 328, EN
300 440, FCC CFR47 Part 15
and ARIB STD-T-66
Measured as defined by [1]
[1] requires max. 35 %
Differential impedance as seen
from the RF-port (RF_P and
RF_N) towards the antenna. For
matching details see the Input /
Output Matching section on page
54.
SWRS041c
Page 9 of 85
|
▷ |