DM504 Datasheet, PDF (81/211 Pages) Texas Instruments – SoC for Vision Analytics 12mm Package (ABE) Silicon Revision 2.0

www.ti.com
DM504
SPRS977A – NOVEMBER 2016 – REVISED JANUARY 2017
Table 5-12. CSI2 DC Electrical Characteristics (continued)
over operating free-air temperature range (unless otherwise noted)
PARAMETER
MIN
DS[1:0] = 00
Z_O Output impedance (drive strength)
DS[1:0] = 01
DS[1:0] = 10
DS[1:0] = 11
SC[1:0] = 00 (slowest)
t_OT
Output transition time (t_R or t_F evaluated ^{SC[1:0] = 01 (slow)}
between 10% and 90% of V_PAD)
SC[1:0] = 10 (fast)
SC[1:0] = 11 (fastest)
SC[1:0] = 00 (slowest)
t_OT
Output transition time (t_R or t_F evaluated ^{SC[1:0] = 01 (slow)}
between 10% and 90% of V_PAD)
SC[1:0] = 10 (fast)
SC[1:0] = 11 (fastest)
Signal Names in Mode 0 (Function 1):
Bottom Balls:
V_IH Input high-level threshold
V_IL Input low-level threshold
V_HYS Input hysteresis voltage
C_IN Input capacitance
t_IT
Input transition time (t_R or t_F evaluated between 10% and 90% of
V_PAD)
C_OUT Load capacitance (C_L1 = C_L2)
Signal Name in Mode 0 (Function 1):
Bottom Ball: D31
V_OH Output high-level threshold (I_OH =TBD)
V_OL Output low-level threshold (I_OL =TBD)
f_OUT Output frequency, fref_xtal_clk
t_WOUT Output pulse duration, fref_xtal_clk low or high
t_OT
Output transition time (t_R or t_F evaluated between 20% and 80% of
V_PAD),
C_OUT Load capacitance
Signal Name in Mode 0 (Function 1):
Bottom Ball: B28
Single-ended Application Mode
V_SWING Input voltage swing
R_IN Input resistance
C_IN Input capacitance
Single–ended High-Voltage CMOS Application Mode
V_IH Input high-level voltage
V_IL Input low-level voltage
R_IN Input resistance
C_IN Input capacitance
t_IT
Input transition time (t_R or t_F ) evaluated between 10% to 90% of
V_PAD
NOM
MAX
UNIT
Ω
ns
ns
V
V
mV
pF
ns
pF
V
V
MHz
ns
ns
pF
mV
kΩ
pF
V
V
kΩ
pF
ns
Copyright © 2016–2017, Texas Instruments Incorporated
Submit Documentation Feedback
Specifications
81