LM3S2739 Datasheet, PDF (683/752 Pages) List of Unclassifed Manufacturers – Microcontroller

Stellaris^® LM3S2739 Microcontroller
Table 20-5. Signals by Pin Number (continued)
Pin Number
Pin Name
Pin Type Buffer Type^a Description
PA5
I/O
TTL
GPIO port A bit 5.
M5
SSI0Tx
O
TTL
SSI module 0 transmit.
PA7
I/O
TTL
GPIO port A bit 7.
M6
CCP4
I/O
TTL
Capture/Compare/PWM 4.
M7
PG5
I/O
TTL
GPIO port G bit 5.
M8
PF6
I/O
TTL
GPIO port F bit 6.
PF0
I/O
TTL
GPIO port F bit 0.
M9
PWM0
O
TTL
PWM 0. This signal is controlled by PWM Generator 0.
M10
WAKE
I
TTL
An external input that brings the processor out of Hibernate mode
when asserted.
M11
OSC1
O
Analog Main oscillator crystal output. Leave unconnected when using a
single-ended clock source.
M12
HIB
O
OD
An open-drain output with internal pull-up that indicates the
processor is in Hibernate mode.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
20.2.2 Signals by Signal Name
Table 20-6. Signals by Signal Name
Pin Name
ADC0
ADC1
ADC2
ADC3
C0+
C0-
C0o
CAN0Rx
CAN0Tx
CCP0
CCP1
CCP2
CCP3
CCP4
CCP5
CMOD0
Pin Number
B1
A1
B3
B2
A7
A6
M1
G1
G2
E12
L6
D12
M2
M6
B7
E11
Pin Type
I
I
I
I
I
I
O
I
O
I/O
I/O
I/O
I/O
I/O
I/O
I
CMOD1
B10
I
Fault
F2
I
Buffer Type^a Description
Analog Analog-to-digital converter input 0.
Analog Analog-to-digital converter input 1.
Analog Analog-to-digital converter input 2.
Analog Analog-to-digital converter input 3.
Analog Analog comparator 0 positive input.
Analog Analog comparator 0 negative input.
TTL
Analog comparator 0 output.
TTL
CAN module 0 receive.
TTL
CAN module 0 transmit.
TTL
Capture/Compare/PWM 0.
TTL
Capture/Compare/PWM 1.
TTL
Capture/Compare/PWM 2.
TTL
Capture/Compare/PWM 3.
TTL
Capture/Compare/PWM 4.
TTL
Capture/Compare/PWM 5.
TTL
CPU Mode bit 0. Input must be set to logic 0 (grounded); other
encodings reserved.
TTL
CPU Mode bit 1. Input must be set to logic 0 (grounded); other
encodings reserved.
TTL
PWM Fault.
July 15, 2014
683
Texas Instruments-Production Data