SLAU376 Datasheet, PDF (6/33 Pages) Texas Instruments – TAS5622-TAS5624DDVEVM

Quick Setup Guide
+ LEFT SPEAKER OUTPUTS –
+ RIGHT SPEAKER OUTPUTS –
LOUT+ LOUT–
ROUT+ ROUT–
www.ti.com
LEFT CHANNEL
OUTPUT FILTE RS
RIGHT CHANNEL
OUTPUT FILTERS
HEATSINK
TAS5622
TAS5624
PVDD
(+12 to
+36 Vdc)
GN D
MODE
PINS
TAS5538
PBTL – BTL
NORMAL
S1
RESET _{INPUT SIGNAL & CONTROL}
Reset
INTERFACE (J1)
LED
STATUS
LEDs
Figure 4. Physical Structure of the TAS5622-TAS5624DDVEVM (Approximate Layout)
2 Quick Setup Guide
This section describes the TAS5622-TAS5624DDVEVM power supplies and system interfaces. It provides
information regarding handling and unpacking, absolute operating conditions, and switch and jumper
positions. It also provides a step-by-step guide to setting up the TAS5622-TAS5624DDVEVM for device
evaluation.
2.1 Electrostatic Discharge Warning
Many of the components of the TAS5622-TAS5624DDVEVM are susceptible to damage by electrostatic
discharge (ESD). Customers are advised to observe proper ESD handling precautions when unpacking
and handling the EVM, including the use of a grounded wrist strap at an approved ESD workstation.
6
TAS5622-TAS5624DDVEVM
Copyright © 2012, Texas Instruments Incorporated
SLAU376 – May 2012
Submit Documentation Feedback