MSP430F5529 Datasheet, PDF (51/122 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

www.ti.com
MSP430F5529, MSP430F5528, MSP430F5527, MSP430F5526
MSP430F5525, MSP430F5524, MSP430F5522, MSP430F5521
MSP430F5519, MSP430F5517, MSP430F5515, MSP430F5514, MSP430F5513
SLAS590L – MARCH 2009 – REVISED MAY 2013
Recommended Operating Conditions
Typical values are specified at V_CC = 3.3 V and T_A = 25°C (unless otherwise noted)
V_CC
V_{CC, USB}
V_SS
T_A
T_J
C_VCORE
C_DVCC/
C_VCORE
f_SYSTEM
f_{SYSTEM_USB}
USB_wait
PMMCOREVx = 0
Supply voltage during program execution and flash
programming (AV_CC = DV_CC1/2 = DV_CC)⁽¹⁾⁽²⁾
PMMCOREVx = 0, 1
PMMCOREVx = 0, 1, 2
PMMCOREVx = 0, 1, 2, 3
PMMCOREVx = 0
Supply voltage during USB operation, USB PLL disabled,
USB_EN = 1, UPLLEN = 0
PMMCOREVx = 0, 1
PMMCOREVx = 0, 1, 2
PMMCOREVx = 0, 1, 2, 3
Supply voltage during USB operation, USB PLL enabled⁽³⁾, ^{PMMCOREVx = 2}
USB_EN = 1, UPLLEN = 1
PMMCOREVx = 2, 3
Supply voltage (AV_SS = DV_SS1/2 = DV_SS)
Operating free-air temperature
I version
Operating junction temperature
I version
Recommended capacitor at VCORE
Capacitor ratio of DVCC to VCORE
Processor frequency (maximum MCLK frequency)⁽⁴⁾
(see Figure 1)
Minimum processor frequency for USB operation
Wait state cycles during USB operation
PMMCOREVx = 0,
1.8 V ≤ V_CC ≤ 3.6 V
(default condition)
PMMCOREVx = 1,
2.0 V ≤ V_CC ≤ 3.6 V
PMMCOREVx = 2,
2.2 V ≤ V_CC ≤ 3.6 V
PMMCOREVx = 3,
2.4 V ≤ V_CC ≤ 3.6 V
MIN NOM MAX UNIT
1.8
3.6 V
2.0
3.6 V
2.2
3.6 V
2.4
3.6 V
1.8
3.6 V
2.0
3.6 V
2.2
3.6 V
2.4
3.6 V
2.2
3.6 V
2.4
3.6 V
0
V
-40
85 °C
-40
85 °C
470
nF
10
0
8.0
0
12.0
MHz
0
20.0
0
25.0
1.5
16
MHz
cycles
(1) It is recommended to power AV_CC and DV_CC from the same source. A maximum difference of 0.3 V between AV_CC and DV_CC can be
tolerated during power up and operation.
(2) The minimum supply voltage is defined by the supervisor SVS levels when it is enabled. See the PMM, SVS High Side threshold
parameters for the exact values and further details.
(3) USB operation with USB PLL enabled requires PMMCOREVx ≥ 2 for proper operation.
(4) Modules may have a different maximum input clock specification. See the specification of the respective module in this data sheet.
Copyright © 2009–2013, Texas Instruments Incorporated
Submit Documentation Feedback
51
Product Folder Links: MSP430F5529 MSP430F5528 MSP430F5527 MSP430F5526 MSP430F5525 MSP430F5524
MSP430F5522 MSP430F5521 MSP430F5519 MSP430F5517 MSP430F5515 MSP430F5514 MSP430F5513