 English |
|
|
|
|
|
|
|
| LM3S2601 Datasheet, PDF (506/642 Pages) Texas Instruments – Stellaris® LM3S2601 Microcontroller | |||
| |||
| ◁ |
Controller Area Network (CAN) Module
14.1
14.2
Block Diagram
Figure 14-1. CAN Controller Block Diagram
CAN Control
CANCTL
CANSTS
CANERR
CANBIT
CANINT
CANTST
CANBRPE
ABP
Pins
APB
Interface
CAN Interface 1
CANIF1CRQ
CANIF1CMSK
CANIF1MSK1
CANIF1MSK2
CANIF1ARB1
CANIF1ARB2
CANIF1MCTL
CANIF1DA1
CANIF1DA2
CANIF1DB1
CANIF1DB2
CAN Interface 2
CANIF2CRQ
CANIF2CMSK
CANIF2MSK1
CANIF2MSK2
CANIF2ARB1
CANIF2ARB2
CANIF2MCTL
CANIF2DA1
CANIF2DA2
CANIF2DB1
CANIF2DB2
CAN Core
CAN Tx
CAN Rx
Message Object
Registers
CANTXRQ1
CANTXRQ2
CANNWDA1
CANNWDA2
CANMSG1INT
CANMSG2INT
CANMSG1VAL
CANMSG2VAL
Message RAM
32 Message Objects
Signal Description
Table 14-1 on page 507 and Table 14-2 on page 507 list the external signals of the CAN controller
and describe the function of each. The CAN controller signals are alternate functions for some GPIO
signals and default to be GPIO signals at reset. The column in the table below titled "Pin Assignment"
lists the possible GPIO pin placements for the CAN signals. The AFSEL bit in the GPIO Alternate
Function Select (GPIOAFSEL) register (page 301) should be set to choose the CAN controller
function. For more information on configuring GPIOs, see âGeneral-Purpose Input/Outputs
(GPIOs)â on page 278.
506
June 19, 2012
Texas Instruments-Production Data
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese