TLC5958 Datasheet, PDF (5/28 Pages) Texas Instruments – TLC5958 48-Channel, 16-Bit ES-PWM LED Driver with Pre-Charge FET, LED Open Detection and Display Data Memory Support 32-Multiplexing

www.ti.com
TLC5958
SLVSCE7A – MAY 2014 – REVISED SEPTEMBER 2014
8 Specifications
8.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) ⁽¹⁾
V_CC ⁽²⁾
I_OUT
V_IN ⁽²⁾
V_OUT ⁽²⁾
Supply voltage
Output current (dc)
Input voltage
Output voltage
PARAMETER
VCC
OUTx0 to OUTx15, x=R, G, B
SIN, SCLK, LAT, GCLK, IREF
SOUT
OUTx0 to OUTx15, x=R, G, B
T_J(MAX)
Operating junction temperature
MIN
0.3
–0.3
–0.3
–0.3
MAX
6.0
30
V_CC+0.3
V_CC+0.3
11
150
UNIT
V
mA
V
V
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to device ground terminal.
8.2 Handling Ratings
MIN
T_stg
Storage temperature range
–55
V_(ESD) ⁽¹⁾
Electrostatic
discharge
Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all
0
pins ⁽²⁾
Charged device model (CDM), per JEDEC specification
0
JESD22-C101, all pins⁽³⁾
MAX
150
4000
1000
UNIT
°C
V
(1) Electrostatic discharge (ESD) measures device sensitivity and immunity to damage caused by assembly line electrostatic discharges
into the device.
(2) Level listed above is the passing level per ANSI, ESDA, and JEDEC JS-001. JEDEC document JEP155 states that 500-V HBM allows
safe manufacturing with a standard ESD control process.
(3) Level listed above is the passing level per EIA-JEDEC JESD22-C101. JEDEC document JEP157 states that 250-V CDM allows safe
manufacturing with a standard ESD control process.
8.3 Recommended Operating Conditions
At T_A = –40°C to +85°C, unless otherwise noted
DC CHARACTERISTICS, VCC=3V to 5.5V
V_CC
Supply voltage
V_O
Voltage applied to output
V_IH
High level input voltage
V_IL
Low level input voltage
I_OH
High level output current
I_OL
Low level output current
I_OLC
Constant output sink current
T_A
Operating free air temperature
T_J
Operation junction temperature
OUTx0 to OUTx15, x=R, G, B
SIN,SCLK,LAT,GCLK
SIN,SCLK,LAT,GCLK
SOUT
SOUT
OUTx0 to OUTx15, x=R, G, B,
3V ≤ VCC ≤ 3.6V
OUTx0 to OUTx15, x=R, G, B,
4V < VCC ≤ 5.5V
MIN NOM
MAX UNIT
3
0.7×VCC
GND
–40
-40
5.5 V
10 V
VCC V
0.3×VCC V
-2 mA
2 mA
20
mA
25
85 °C
125 °C
Copyright © 2014, Texas Instruments Incorporated
Submit Documentation Feedback
5