TL081CJG Datasheet, PDF (5/45 Pages) Texas Instruments – JFET-INPUT OPERATIONAL AMPLIFIERS

TL081, TL081A, TL081B, TL082, TL082A, TL082B
TL084, TL084A, TL084B
JFETĆINPUT OPERATIONAL AMPLIFIERS
SLOS081G − FEBRUARY 1977 − REVISED SEPTEMBER 2004
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)^†
TL08_C
TL08_AC
TL08_BC
TL08_I
TL084Q TL08_M UNIT
Supply voltage, VCC ₊ (see Note 1)
Supply voltage VCC − (see Note 1)
Differential input voltage, VID (see Note 2)
Input voltage, VI (see Notes 1 and 3)
Duration of output short circuit (see Note 4)
18
18
18
18
V
− 18
− 18
− 18
− 18
V
± 30
± 30
± 30
± 30
V
± 15
± 15
± 15
± 15
V
Unlimited Unlimited Unlimited Unlimited
Continuous total power dissipation
See Dissipation Rating Table
Operating free-air temperature range, TA
D package (8-pin)
0 to 70
97
− 40 to 85 − 40 to 125 − 55 to 125 °C
97
D package (14-pin)
86
86
N package (14-pin)
76
76
Package thermal impedance, θ_JA
(see Notes 5 and 6)
NS package (14-pin)
80
P package (8-pin)
85
85
°C/W
PS package (8-pin)
95
95
PW package (8-pin)
149
PW package (14-pin)
113
113
Operating virtual junction temperature
150
150
150
150
°C
Case temperature for 60 seconds, TC
Lead temperature 1,6 mm (1/16 inch) from case
for 60 seconds
FK package
J or JG package
260
°C
300
°C
Storage temperature range, Tstg
− 65 to 150 − 65 to 150 − 65 to 150 − 65 to 150 °C
† _{Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and}
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC ₊ and VCC _−.
2. Differential voltages are at IN+ with respect to IN −.
3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less.
4. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the
dissipation rating is not exceeded.
5. Maximum power dissipation is a function of TJ(max), θ_JA, and TA. The maximum allowable power dissipation at any allowable
ambient temperature is PD = (TJ(max) − TA)/θ_JA. Operating at the absolute maximum TJ of 150°C can affect reliability.
6. The package thermal impedance is calculated in accordance with JESD 51-7.
PACKAGE
D (14 pin)
FK
J
JG
TA ≤ 25°C
POWER RATING
680 mW
680 mW
680 mW
680 mW
DISSIPATION RATING TABLE
DERATING
FACTOR
7.6 mW/°C
DERATE
ABOVE TA
60°C
TA = 70°C
POWER RATING
604 mW
11.0 mW/°C
88°C
680 mW
11.0 mW/° C
88°C
680 mW
8.4 mW/°C
69°C
672 mW
TA = 85°C
POWER RATING
490 mW
680 mW
680 mW
546 mW
TA = 125°C
POWER RATING
186 mW
273 mW
273 mW
210 mW
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
5