LMH6715QML Datasheet, PDF (5/20 Pages) Texas Instruments – Dual Wideband Video Op Amp

DC Parameter Drift Values
The following conditions apply, unless otherwise specified.
Deltas not required on B Level product. Deltas required for S Level product at Group B5 only, or as specified on the Internal
Processing Instructions (IPI).
Symbol Parameter
Conditions
Notes Min Max Unit
Sub-
groups
I_BN
Input Bias Current, Noninverting
I_BI
Input Bias Current, Inverting
V_IO
Input Offset Voltage
I_CC
Supply Current
R_L = ∞
(Note 4) -1.2 +1.2
μA
1
(Note 4) -2.0 +2.0
μA
1
(Note 4) -1.0 +1.0
mV
1
(Note 4) -1.0 +1.0
mA
1
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is
functional, but do not guarantee specific performance limit s. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed
specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test
conditions.
Note 2: The maximum power dissipation must be derated at elevated temperatures and is dictated by T_Jmax (maximum junction temperature), θ_JA (package
junction to ambient thermal resistance), and T_A (ambient temperature). The maximum allowable power dissipation at any temperature is P_Dmax = (T_Jmax - T_A)/
θ_JA or the number given in the Absolute Maximum Ratings, whichever is lower.
Note 3: Human body model, 1.5kΩ in series with 100 pF.
Note 4: If not tested, shall be guaranteed to the limits specified in table 1 herein.
Note 5: Group A testing only.
Note 6: Pre and post irradiation limits are identical to those listed under electrical characteristics. These parts may be dose rate sensitive in a space environment
and demonstrate enhanced low dose rate effect. Radiation end point limits for the noted parameters are guaranteed only for the conditions as specified in MIL-
STD-883, Method 1019.
www.national.com
4