LMH6611 Datasheet, PDF (5/42 Pages) Intersil Corporation – PowerWise® Single Supply 345 MHz Rail-to-Rail Output Amplifiers

LMH6611, LMH6612
www.ti.com
SNOSB00K – NOVEMBER 2007 – REVISED OCTOBER 2013
+5V Electrical Characteristics
Unless otherwise specified, all limits are specified for T_J = +25°C, V⁺ = 5V, V^− = 0V, V_S = V⁺ – V^−, DISABLE = 5V, V_CM = V_O =
V⁺/2, A_V = +1, R_F = 0Ω, when A_V ≠ +1 then R_F = 560Ω, R_L = 1 kΩ. Boldface limits apply at temperature extremes.
Symbol
Parameter
Condition
Min
Typ
Max
Units
(1)
(2)
(1)
Frequency Domain Response
SSBW –3 dB Bandwidth Small Signal
GBW
LSBW
Gain Bandwidth (LMH6611)
Gain Bandwidth (LMH6612)
−3 dB Bandwidth Large Signal
Peak
0.1
dBBW
Peaking
0.1 dB Bandwidth
DG
Differential Gain
DP
Differential Phase
Time Domain Response
t_r/t_f
Rise & Fall Time
SR
Slew Rate
t_{s_0.1}
0.1% Settling Time
t_{s_0.01}
0.01% Settling Time
Distortion and Noise Performance
SFDR Spurious Free Dynamic Range
e_n
Input Voltage Noise
i_n
Input Current Noise
CT
Crosstalk (LMH6612)
Input, DC Performance
V_OS
Input Offset Voltage (LMH6611)
A_V = 1, R_L = 1 kΩ, V_OUT = 0.2 V_PP
A_V = 2, −1, R_L = 1 kΩ, V_OUT = 0.2 V_PP
A_V = 10, R_F = 2 kΩ, R_G = 221Ω, R_L = 1 kΩ,
V_OUT = 0.2 V_PP
A_V = 10, R_F = 2 kΩ, R_G = 221Ω, R_L = 1 kΩ,
V_OUT = 0.2 V_PP
A_V = 1, R_L = 1 kΩ, V_OUT = 2 V_PP
A_V = 2, R_L = 150Ω, V_OUT = 2 V_PP
A_V = 1
A_V = 1, V_OUT = 0.5 V_PP, R_L = 1 kΩ
A_V = 2, V_OUT = 0.5 V_PP, R_L = 1 kΩ
R_F = R_G = 680Ω
A_V = 2, V_OUT = 2 V_PP, R_L = 150Ω,
R_F = R_G = 665Ω
A_V = 2, 4.43 MHz, 0.6V < V_OUT < 2V,
R_L = 150Ω to V⁺/2
A_V = 2, 4.43 MHz, 0.6V < V_OUT < 2V,
R_L = 150Ω to V⁺/2
2V Step, A_V = 1
2V Step, A_V = 1
2V Step, A_V = −1
2V Step, A_V = −1
f_C = 100 kHz, A_V = 2, V_OUT = 2 V_PP
f_C = 1 MHz, A_V = 2, V_OUT = 2 V_PP
f_C = 5 MHz, A_V = 2, V_O = 2 V_PP
f = 100 kHz
f = 100 kHz
f = 5 MHz, V_IN = 2 V_PP
V_CM = 0.5V
TCV_OS
I_B
Input Offset Voltage (LMH6612) V_CM = 0.5V
Input Offset Voltage Average Drift See⁽³⁾
Input Bias Current
V_CM = 0.5V
I_O
Input Offset Current
C_IN
R_IN
CMVR
Input Capacitance
Input Resistance
Input Voltage Range
DC, CMRR ≥ 78 dB
345
112
115
135
130
77
85
0.3
45
68
45
0.05
0.06
MHz
MHz
MHz
dB
MHz
%
deg
3.6
ns
460
V/μs
67
ns
100
102
96
dBc
82
10
nV/√Hz
2
pA/√Hz
71
dB
0.013
±1.5
±2
mV
0.022
±1.5
±2
4
µV/°C
−6.3
−10.1
−11.1
μA
0.01
±0.5
±0.7
μA
2.5
pF
6
MΩ
−0.2
3.8
V
(1) Limits are 100% production tested at 25°C. Limits over the operating temperature range are ensured through correlations using the
Statistical Quality Control (SQC) method.
(2) Typical values represent the most likely parametric norm as determined at the time of characterization. Actual typical values may vary
over time and will also depend on the application and configuration. The typical values are not tested and are not ensured on shipped
production material.
(3) Voltage average drift is determined by dividing the change in V_OS by temperature change.
Copyright © 2007–2013, Texas Instruments Incorporated
Submit Documentation Feedback
5
Product Folder Links: LMH6611 LMH6612