DS96176_15 Datasheet, PDF (5/13 Pages) Texas Instruments – RS-485/RS-422 Differential Bus Transceiver

Not Recommended For New Designs
Receiver Switching Characteristics (Continued)
Note 8: Hysteresis is the difference between the positive-going input threshold voltage V_T+, and the negative-going input threshold voltage, V_T−.
Note 9: Refer to EIA Standard RS-485 for exact conditions.
Note 10: Only one output at a time should be shorted.
Parameter Measurement Information
DS009630-2
FIGURE 1. Driver V_OD and V_OC
DS009630-3
FIGURE 2. Driver V_OD with Varying
Common Mode Voltage
FIGURE 3. Receiver V_OH and V_OL
DS009630-4
DS009630-5
FIGURE 4. Driver Differential Output Delay and Transition Times
DS009630-6
www.national.com
DS009630-7
FIGURE 5. Driver Propagation Times
DS009630-8
4