74AC11828 Datasheet, PDF (5/6 Pages) Texas Instruments – 10-BIT BUFFER/BUS DRIVER WITH 3-STAE OUTPUTS

From Output
Under Test
CL = 50 pF
(See Note A)
74AC11828
10ĆBIT BUFFER/BUS DRIVER
WITH 3-STATE OUTPUTS
SCAS083A − NOVEMBER 1989 − REVISED APRIL 1993
PARAMETER MEASUREMENT INFORMATION
500 Ω
500 Ω
2 X VCC
S1
Open
GND
TEST
tPLH/tPHL
tPLZ/tPZL
tPHZ/tPZH
S1
Open
2 x VCC
GND
LOAD CIRCUIT FOR OUTPUTS
Input
(See Note B)
tPHL
Output
50%
50%
50%
VOH
VOL
tPLH
50%
VOH
VOL
PROPAGATION DELAY TIMES
Output
Control
(low-level
enabling)
tPZL
Output
Waveform 1
S1 at 2 x VCC
(See Note C)
tPZH
Output
Waveform 2
S1 at GND
(See Note C)
50%
tPLZ
50%
tPHZ
50%
50%
VCC
0
VCC
20% VCC
VOL
80% VCC ^VOH
VOL
ENABLE AND DISABLE TIMES
NOTES: A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2
is for an output with internal conditions such that the output is high except when disabled by the output control.
C. All input pulses are supplied by the generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr ≤ 2.5 ns, tf ≤ 2.5 ns.
D. The outputs are measured one at a time with one transition per measurement.
Figure 1. LOAD CIRCUIT AND VOLTAGE WAVEFORMS
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
5