TPS92410 Datasheet, PDF (4/25 Pages) Texas Instruments – Switch-Controlled, Direct Drive, Linear Controller for Offline LED Drivers

TPS92410
SLUSBW9 – MAY 2014
6 Specifications
www.ti.com
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) ⁽¹⁾
Input voltage
VIN
VCC
Output voltage
GDL
MULT, VREF, ADIM, COMP, CPS, CDD, TSNS
DOV
Source current
CS
Sink current
CS
Operating junction temperature, T_J(2)
MIN MAX UNIT
–0.3
700 V
–0.3
18
–0.3
18
V
–0.3
7.7
–0.3
6
1 mA
1 mA
–40
150 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Maximum junction temperature is internally limited by the device.
6.2 Handling Ratings
T_stg
V_(ESD) ⁽¹⁾
Storage temperature range
Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins⁽²⁾
Electrostatic discharge
Charged device model (CDM), per JEDEC specification JESD22-C101,
all pins⁽³⁾
MIN MAX UNIT
–65 150 °C
–1
1 kV
–250 250 V
(1) Electrostatic discharge (ESD) to measure device sensitivity and immunity to damage caused by assembly line electrostatic discharges
into the device.
(2) Level listed above is the passing level per ANSI/ESDA/JEDEC JS-001. JEDEC document JEP155 states that 500V HBM allows safe
manufacturing with a standard ESD control process. Terminals listed as 1000V may actually have higher performance.
(3) Level listed above is the passing level per EIA-JEDEC JESD22-C101. JEDEC document JEP157 states that 250V CDM allows safe
manufacturing with a standard ESD control process. Terminals listed as 250V may actually have higher performance.
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
V_IN
V_MULT
V_ADIM
T_J
Input voltage
Multiplier peak input voltage
Analog dimming input voltage
Operating junction temperature
MIN
NOM
MAX UNIT
9.5
450 V
3V
0
3V
-40
125 °C
6.4 Thermal Information
THERMAL METRIC⁽¹⁾
TPS92410
D (13)
UNIT
R_θJA
R_θJC(top)
R_θJB
ψ_JT
ψ_JB
R_θJC(bot)
Junction-to-ambient thermal resistance
Junction-to-case (top) thermal resistance
Junction-to-board thermal resistance
Junction-to-top characterization parameter
Junction-to-board characterization parameter
Junction-to-case (bottom) thermal resistance
84.8
39.8
39.5
°C/W
8.9
39.0
N/A
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.
4
Submit Documentation Feedback
Product Folder Links: TPS92410
Copyright © 2014, Texas Instruments Incorporated