English
Language : 

TLC7701-Q1_16 Datasheet, PDF (4/18 Pages) Texas Instruments – MICROPOWER SUPPLY VOLTAGE SUPERVISORS
TLC7701-Q1, TLC7705-Q1, TLC7733-Q1
MICROPOWER SUPPLY VOLTAGE SUPERVISORS
SGLS208A − OCTOBER 2003 − REVISED MAY 2008
timing diagram
VDD and VI(SENSE)
VIT+
Threshold Voltages
Vres
VIT+
VIT−
RESET
Output
ÎÎtd
Output
Undefined
t
td
t
absolute maximum ratings over operating free-air temperature (unless otherwise noted)†
Supply voltage, VDD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Input voltage range, CONTROL, RESIN, SENSE (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to 7 V
Maximum low output current, IOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 mA
Maximum high output current, IOH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −10 mA
Input clamp current, IIK (VI < 0 or VI > VDD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 10 mA
Output clamp current, IOK (VO < 0 or VO > VDD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 10 mA
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA: TL77xxQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40°C to 125°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: All voltage values are with respect to GND.
PACKAGE
PW
DISSIPATION RATING TABLE
TA ≤ 25°C
POWER RATING
525 mW
DERATING FACTOR
ABOVE TA = 25°C
4.2 mW/°C
TA = 85°C
POWER RATING
273 mW
TA = 125°C
POWER RATING
105 mW
recommended operating conditions at specified temperature range
Supply voltage, VDD
Input voltage, VI
High-level input voltage at RESIN and CONTROL‡, VIH
Low-level input voltage at RESIN and CONTROL‡, VIL
High-level output current, IOH
Low-level output current, IOL
VDD ≥ 2.7 V
Input transition rise and fall rate at RESIN and CONTROL, Δt/ΔV
Operating free-air temperature range, TA
‡ To ensure a low supply current, VIL should be kept < 0.3 V and VIH > VDD − 0.3 V.
MIN
2
0
0.7×VDD
− 40
MAX
6
VDD
0.2×VDD
−2
2
100
125
UNIT
V
V
V
V
mA
mA
ns/V
°C
4
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265