TLC59213 Datasheet, PDF (4/13 Pages) Texas Instruments – 8-BIT PARALLEL IN/OUT DARLINGTON SOURCE DRIVER WITH LATCH

TLC59213
TLC59213A
SLVS867A – MAY 2009 – REVISED MARCH 2010
ELECTRICAL CHARACTERISTICS
over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
I_CEX
V_CE(sus)
I_I
V_f
I_CC
Output leakage current
Output saturation voltage
Input current
Clamp forward voltage
Supply current
V_CC = 13.2 V, Outputs off
I_OUT = –350 mA
I_OUT = –225 mA
I_OUT = –100 mA
V_CC = 13.2 V, V_I = 0 or 13.2 V
I_f = –350 mA
V_CC = 13.2 V,
V_I = 0 or 13.2 V
All outputs OFF
All outputs ON
C_I
Input capacitance
www.ti.com
MIN
TYP
MAX UNIT
2 µA
2.35
2.15 V
1.96
1 µA
–2
V
4.6
13
mA
4.8
13
10 pF
TIMING REQUIREMENTS
over recommended operating free-air temperature range (unless otherwise noted), see Figure 3
PARAMETER
TEST CONDITIONS
t_su
Setup time
D before CLK ↑
CLR high before CLK ↑
TLC59213,
TLC59213A
T_A = -40°C to 85°C
t_h
Hold time
D after CLK ↑
TLC59213
TLC59213A
T_A = 0°C to 70°C
T_A = 0°C to 70°C, V_CC = 4.5 V to 5.5 V
T_A = 0°C to 70°C, V_CC = 10.8 V to 13.2 V
t_w
Pulse width
CLK, CLR
MIN MAX UNIT
50
ns
50
ns
50
25
ns
15
19
100
ns
SWITCHING CHARACTERISTICS
over operating free-air temperature range (unless otherwise noted), see Figure 3
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
TEST
CONDITIONS
T_A = 25°C
MIN TYP MAX
t_PLH
Propagation delay time,
low-to-high level output
CLK
Y
RL = 25 Ω,
C_L = 15 pF
t_{PHL Propagation delay time,}
CLK
Y
RL = 25 Ω,
t_PHLR ^{high-to-low level output}
CLR
Y
C_L = 15 pF
107 200
111 200
104 200
T_A = –40°C to 85°C
MIN
MAX
250
250
250
UNIT
ns
ns
4
Submit Documentation Feedback
Copyright © 2009–2010, Texas Instruments Incorporated
Product Folder Link(s): TLC59213 TLC59213A