TLC59116F Datasheet, PDF (4/31 Pages) Texas Instruments – 16-CHANNEL FAST-MODE PLUS I2C BUS LED DRIVER

TLC59116F
SCLS714B – MARCH 2009 – REVISED JULY 2011
TERMINAL
NAME
QFN (RHB) TSSOP (PW)
PIN NO.
PIN NO.
A0
31
2
A1
32
3
A2
1
4
A3
2
5
GND
7, 18, 23 10, 19, 24
N.C.
12, 13, 28,
29, 30
1
OUT0–OUT3
3–6
6–9
OUT4–OUT7
8–11
11–14
OUT8–OUT11
14–17
15–18
OUT12–OUT15
19–22
20–23
RESET
24
25
SCL
25
26
SDA
26
27
V_CC
27
28
TERMINAL FUNCTIONS
I/O
DESCRIPTION
I Address input 0
I Address input 1
I Address input 2
I Address input 3
– Power ground
– No internal connection
O Open-drain output 0 to 3, LED ON at low
O Open-drain output 4 to 7, LED ON at low
O Open-drain output 8 to 11, LED ON at low
O Open-drain output 12 to 15, LED ON at low
I Active-low reset input
I Serial clock input
I/O Serial data input/output
– Power supply
www.ti.com
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V_CC Supply voltage range
V_I
Input voltage range
V_O
Output voltage range
I_O
Continuous output current per channel
P_D
Power dissipation (T_A = 25°C, JESD 51-7)
T_J
Junction temperature range
T_stg Storage temperature range
PW package
0
7V
–0.4
7V
–0.5
20 V
120 mA
1.6 W
–40
150 °C
–55
150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
THERMAL IMPEDANCE
θ_JA
Package thermal impedance (JESD 51-7)
UNIT
61.7
°C/W
4
Copyright © 2009–2011, Texas Instruments Incorporated