SN74SSTV32877 Datasheet, PDF (4/12 Pages) Texas Instruments – 26-BIT REGISTERED BUFFER WITH SSTL_2 INPUTS AND OUTPUTS

SN74SSTV32877
26-BIT REGISTERED BUFFER
WITH SSTL_2 INPUTS AND OUTPUTS
SCES378B – OCTOBER 2001 – REVISED MAY 2002
recommended operating conditions (see Note 4)
MIN
NOM
MAX
UNIT
VCC
VDDQ
VREF
VTT
VI
VIH
VIL
VIH
VIL
VIH
VIL
VICR
VI(PP)
Supply voltage
Output supply voltage
Reference voltage (VREF = VDDQ/2)
Termination voltage
Input voltage
AC high-level input voltage
AC low-level input voltage
DC high-level input voltage
DC low-level input voltage
High-level input voltage
Low-level input voltage
Common-mode input voltage range
Peak-to-peak input voltage
OE, data inputs
OE, data inputs
OE, data inputs
OE, data inputs
RESET
RESET
CLK, CLK
CLK, CLK
VDDQ
2.3
2.7
V
2.7
V
1.15
1.25
1.35
V
VREF–40mV VREF VREF+40mV V
0
VCC
V
VREF+310mV
V
VREF–310mV V
VREF+150mV
V
VREF–150mV V
1.7
V
0.7
V
0.97
1.53
V
360
mV
IOH High-level output current
IOL
Low-level output current
TA
Operating free-air temperature
-20
mA
20
0
70
_C
NOTE 4: The RESET input of the device must be held at VCC or GND to ensure proper device operation. The differential inputs must not be floating
unless RESET is low. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
4
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265