SN74LVC2G06_15 Datasheet, PDF (4/28 Pages) Texas Instruments – Dual Inverter Buffer and Driver With Open-Drain Outputs

SN74LVC2G06
SCES307J – AUGUST 2001 – REVISED JULY 2015
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)⁽¹⁾
V_CC Supply voltage
V_I
Input voltage⁽²⁾
V_O
Voltage applied to any output in the high-impedance or power-off state⁽²⁾
V_O
Voltage applied to any output in the high or low state⁽²⁾⁽³⁾
I_IK
Input clamp current
V_I < 0
I_OK Output clamp current
V_O < 0
I_O
Continuous output current
Continuous current through V_CC or GND
T_stg Storage Temperature
MIN
MAX
UNIT
–0.5
6.5
V
–0.5
6.5
V
–0.5
6.5
V
–0.5
6.5
V
–50
mA
–50
mA
±50
mA
±100
mA
–65
150
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The value of V_CC is provided in the Recommended Operating Conditions table.
6.2 ESD Ratings
V_(ESD) Electrostatic discharge
Human body model (HBM), per ANSI/ESDA/JEDEC JS-001⁽¹⁾
Charged-device model (CDM), per JEDEC specification JESD22-
C101 ⁽²⁾
VALUE
+2000
+1000
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
UNIT
V
4
Submit Documentation Feedback
Copyright © 2001–2015, Texas Instruments Incorporated
Product Folder Links: SN74LVC2G06