SN54AC10_15 Datasheet, PDF (4/20 Pages) Texas Instruments – TRIPLE 3-INPUT POSITIVE-NAND GATES

SN54AC10, SN74AC10
TRIPLE 3ĆINPUT POSITIVEĆNAND GATES
SCAS529D − AUGUST 1995 − REVISED OCTOBER 2003
switching characteristics over recommended operating free-air temperature range,
V_CC = 3.3 V " 0.3 V (unless otherwise noted) (see Figure 1)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
TA = 25°C
SN54AC10 SN74AC10
MIN TYP MAX MIN MAX MIN MAX
tPLH
tPHL
A, B, or C
1.5
6 9.5
1
11
1 10.5
Y
1.5 5.5 8.5
1
10
1
10
UNIT
ns
switching characteristics over recommended operating free-air temperature range,
V_CC = 5 V " 0.5 V (unless otherwise noted) (see Figure 1)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
TA = 25°C
SN54AC10 SN74AC10
MIN TYP MAX MIN MAX MIN MAX
tPLH
tPHL
A, B, or C
1.5 4.5
7
1 8.5
1
8
Y
1.5
4
6
1
7
1 6.5
UNIT
ns
operating characteristics, V_CC = 5 V, T_A = 25°C
PARAMETER
Cpd Power dissipation capacitance
TEST CONDITIONS
CL = 50 pF,
f = 1 MHz
TYP UNIT
25 pF
PARAMETER MEASUREMENT INFORMATION
TEST
tPLH/tPHL
S1
Open
Input
(see Note B)
50% VCC
50 % VCC
VCC
0V
From Output
Under Test
CL = 50 pF
(see Note A)
500 Ω
500 Ω
2 × VCC
S1
Open
tPLH
In-Phase
Output
tPHL
Out-of-Phase
Output
50% VCC
50% VCC
tPHL
VOH
50% VCC
VOL
tPLH
VOH
50% VCC
VOL
LOAD CIRCUIT
VOLTAGE WAVEFORMS
NOTES: A. CL includes probe and jig capacitance.
B. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr v 2.5 ns, tf v 2.5 ns.
C. The outputs are measured one at a time with one input transition per measurement.
Figure 1. Load Circuit and Voltage Waveforms
4
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265