LPV811 Datasheet, PDF (4/12 Pages) Texas Instruments – Nanopower Operational Amplifiers

LPV811, LPV812
SNOSD33 – AUGUST 2016
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings
Over operating free-air temperature range (unless otherwise noted) ⁽¹⁾
Supply voltage, V_s = (V+) - (V-)
Input pins
Voltage ^{(2) (3)}
Input pins
Current
Output short
current ⁽⁴⁾
Operating temperature
Storage temperature, T_stg
Junction temperature
Common mode
Differential
MIN
–0.3
(V-) - 0.3
(V-) - 0.3
-10
MAX
6
(V+) + 0.3
(V+) + 0.3
10
Continuous Continuous
–40
125
–65
150
150
UNIT
V
V
V
mA
°C
°C
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Not to exceed -0.3V or +6.0V on ANY pin, referred to V-
(3) Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.3 V beyond the supply rails should
be current-limited to 10 mA or less.
(4) Short-circuit to Vs/2, one amplifer per package. Continuous short circuit operation at elevated ambient temperature can result in
exceeding the maximum allowed junction temperature of 150°C.
6.2 ESD Ratings
V_(ESD) Electrostatic discharge
Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001⁽¹⁾
Charged-device model (CDM), per JEDEC specification JESD22-
C101 ⁽²⁾
VALUE
±1000
±250
UNIT
V
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. Manufacturing with
less than 500-V HBM is possible with the necessary precautions. Pins listed as ±2000 V may actually have higher performance.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. Manufacturing with
less than 250-V CDM is possible with the necessary precautions. Pins listed as ±750 V may actually have higher performance.
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
Supply voltage (V+ – V–)
Specified temperature
MIN
MAX
UNIT
1.6
5.5
V
-40
125
°C
6.4 Thermal Information
THERMAL METRIC⁽¹⁾
LPV811
DBV (SOT-
23)
5 PINS
LPV811
DGK
(VSSOP)
5 PINS
UNIT
θ_JA
θ_JCtop
θ_JB
ψ_JT
ψ_JB
Junction-to-ambient thermal resistance
Junction-to-case (top) thermal resistance
Junction-to-board thermal resistance
Junction-to-top characterization parameter
Junction-to-board characterization parameter
177.4
133.9
36.3
23.6
35.7
184.2
75.3
105.5
13.5
103.9
ºC/W
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report, SPRA953.
4
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated