JM38510-00104BCA Datasheet, PDF (4/25 Pages) Texas Instruments – QUADRUPLE 2-INPUT POSITIVE-NAND GATES

SN5400, SN54LS00, SN54S00
SN7400, SN74LS00, SN74S00
QUADRUPLE 2ĆINPUT POSITIVEĆNAND GATES
SDLS025B − DECEMBER 1983 − REVISED OCTOBER 2003
absolute maximum ratings over operating free-air temperature (unless otherwise noted)^†
Supply voltage, V_CC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Input voltage: ’00, ’S00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
’LS00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Package thermal impedance, θ_JA (see Note 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W
DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96°C/W
N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80°C/W
NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76°C/W
PS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95°C/W
Storage temperature range, T_stg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
† _{Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and}
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. Voltage values are with respect to network ground terminal.
2. The package termal impedance is calculated in accordance with JESD 51-7.
recommended operating conditions (see Note 3)
SN5400
MIN NOM MAX
SN7400
UNIT
MIN NOM MAX
VCC Supply voltage
4.5
5 5.5 4.75
5 5.25 V
VIH High-level input voltage
2
2
V
VIL
Low-level input voltage
0.8
0.8 V
IOH High-level output current
−0.4
−0.4 mA
IOL
Low-level output current
16
16 mA
TA
Operating free-air temperature
−55
125
0
70 °C
NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
TEST CONDITIONS‡
SN5400
MIN TYP§ MAX
SN7400
MIN TYP§ MAX
VIK
VCC = MIN,
II = −12 mA
−1.5
−1.5
VOH
VCC = MIN,
VIL = 0.8 V,
IOH = −0.4 mA
2.4 3.4
2.4 3.4
VOL
VCC = MIN,
VIH = 2 V,
IOL = 16 mA
0.2 0.4
0.2 0.4
II
VCC = MAX,
VI = 5.5 V
1
1
IIH
VCC = MAX,
VI = 2.4 V
40
40
IIL
VCC = MAX,
VI = 0.4 V
−1.6
−1.6
IOS¶
VCC = MAX
−20
−55 −18
−55
ICCH
VCC = MAX,
VI = 0 V
4
8
4
8
ICCL
VCC = MAX,
VI = 4.5 V
12
22
12
22
‡ _{For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.}
§ _{All typical values are at VCC = 5 V, TA = 25°C.}
¶ _{Not more than one output should be shorted at a time.}
UNIT
V
V
V
mA
µA
mA
mA
mA
mA
4
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265