DRV8801A-Q1 Datasheet, PDF (4/24 Pages) Texas Instruments – DMOS Full-Bridge Motor Drivers

DRV8801A-Q1
SLVSC79C – JUNE 2014 – REVISED JULY 2016
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)⁽¹⁾
Power supply voltage⁽²⁾
Charge pump voltage
V_BB
VCP, CP1, and CP2
MIN
–0.3
–0.3
Digital pin voltage
PHASE, ENABLE, MODE1, MODE2, nSLEEP, nFAULT
–0.3
V_BB to OUTx voltage
OUTA and OUTB
–0.3
OUTx to GND voltage
OUTA and OUTB
–0.3
Sense pin voltage
SENSE
–0.5
H-bridge output current
OUTA, OUTB, and SENSE
VPROPI pin voltage
VPROPI
–0.3
Maximum junction temperature, T_J
Storage temperature, T_stg
–40
MAX
40
V_BB + 7
7
36
36
0.5
2.8
3.6
150
125
UNIT
V
V
V
V
V
V
A
V
°C
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to network ground terminal.
6.2 ESD Ratings
V_(ESD)
Electrostatic
discharge
Human-body model (HBM), per AEC Q100-002⁽¹⁾
Charged-device model (CDM), per AEC Q100-011
All pins
Corner pins (1, 4, 5, 8, 9, 12,
13, and 16)
VALUE
±2000
±500
±750
(1) AEC Q100-002 indicates that HBM stressing shall be in accordance with the ANSI/ESDA/JEDEC JS-001 specification.
UNIT
V
6.3 Recommended Operating Conditions
V_BB
V_CC
ƒ_(PWM)
I_O
T_A
Power supply voltage
Logic supply voltage
Applied PWM signal (PHASE and ENABLE)
H-bridge peak output current
Ambient temperature
MIN
MAX UNIT
6.5
36
V
0
5.5
V
0
100 kHz
0
2.8
A
–40
125
°C
4
Submit Documentation Feedback
Copyright © 2014–2016, Texas Instruments Incorporated
Product Folder Links: DRV8801A-Q1