|
LM3S2608 Datasheet, PDF (39/684 Pages) Texas Instruments – Stellaris® LM3S2608 Microcontroller | |||
|
◁ |
Stellaris® LM3S2608 Microcontroller
â Two I2C modules, each with the following features:
â Devices on the I2C bus can be designated as either a master or a slave
⢠Supports both sending and receiving data as either a master or a slave
⢠Supports simultaneous master and slave operation
â Four I2C modes
⢠Master transmit
⢠Master receive
⢠Slave transmit
⢠Slave receive
â Two transmission speeds: Standard (100 Kbps) and Fast (400 Kbps)
â Master and slave interrupt generation
⢠Master generates interrupts when a transmit or receive operation completes (or aborts
due to an error)
⢠Slave generates interrupts when data has been sent or requested by a master
â Master with arbitration and clock synchronization, multimaster support, and 7-bit addressing
mode
â Controller Area Network (CAN)
â CAN protocol version 2.0 part A/B
â Bit rates up to 1 Mbps
â 32 message objects with individual identifier masks
â Maskable interrupt
â Disable Automatic Retransmission mode for Time-Triggered CAN (TTCAN) applications
â Programmable Loopback mode for self-test operation
â Programmable FIFO mode enables storage of multiple message objects
â Gluelessly attaches to an external CAN interface through the CANnTX and CANnRX signals
â Analog Comparators
â Two independent integrated analog comparators
â Configurable for output to drive an output pin, generate an interrupt, or initiate an ADC sample
sequence
â Compare external pin input to external pin input or to internal programmable voltage reference
June 19, 2012
39
Texas Instruments-Production Data
|
▷ |