English
Language : 

TL783_12 Datasheet, PDF (3/20 Pages) Texas Instruments – HIGH-VOLTAGE ADJUSTABLE REGULATOR
TL783
www.ti.com ............................................................................................................................................... SLVS036M – SEPTEMBER 1981 – REVISED APRIL 2008
Electrical Characteristics
Vl – VO = 25 V, IO = 0.5 A, TJ = 0°C to 125°C (unless otherwise noted)
PARAMETER
TEST CONDITIONS(1)
Input voltage regulation(2)
Ripple rejection
Output voltage regulation
Output voltage change with temperature
Vl – VO = 20 V to 125 V,
P ≤ rated dissipation
TJ = 25°C
TJ = 0°C to 125°C
ΔVI(PP) = 10 V, VO = 10 V, f = 120 Hz
IO = 15 mA to 700 mA,
TJ = 25°C
VO ≤ 5 V
VO ≥ 5 V
IO = 15 mA to 700 mA,
P ≤ rated dissipation
VO ≤ 5 V
VO ≥ 5 V
Output voltage long-term drift
Output noise voltage
Minimum output current to maintain regulation
Peak output current
ADJ input current
1000 hours at TJ = 125°C, Vl – VO = 125 V
f = 10 Hz to 10 kHz, TJ = 25°C
Vl – VO = 125 V
Vl – VO = 25 V, t = 1 ms
Vl – VO = 15 V, t = 30 ms
Vl – VO = 25 V, t = 30 ms
Vl – VO = 125 V, t = 30 ms
Change in ADJ input current
Vl – VO = 15 V to 125 V, IO = 15 mA to 700 mA,
P ≤ rated dissipation
Reference voltage (OUT to ADJ)(3)
Vl – VO = 10 V to 125 V, IO = 15 mA to 700 mA,
P ≤ rated dissipation
MIN TYP
0.001
0.004
66
76
7.5
0.15
20
0.3
0.4
0.2
0.003
1100
715
700
900
100
250
83
0.5
MAX
0.01
0.02
25
0.5
70
1.5
15
UNIT
%/V
dB
mV
%
mV
%
%
%
%
mA
mA
110 µA
5 µA
1.2 1.27
1.3 V
(1) Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be
taken into account separately.
(2) Input voltage regulation is expressed here as the percentage change in output voltage per 1-V change at the input
(3) Due to the dropout voltage and output current-limiting characteristics of this device, output current is limited to less than 700 mA at
input-to-output voltage differentials of less than 25 V.
Copyright © 1981–2008, Texas Instruments Incorporated
Product Folder Link(s): TL783
Submit Documentation Feedback
3