TL072-EP Datasheet, PDF (3/19 Pages) Texas Instruments – LOW-NOISE JFET-INPUT OPERATIONAL AMPLIFIER

TL072-EP, TL074-EP
www.ti.com
SLOS747C – OCTOBER 2011 – REVISED AUGUST 2012
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V_CC+
V_CC–
V_ID
V_I
Supply voltage⁽²⁾
Differential input voltage⁽³⁾
Input voltage^{(2) (4)}
Duration of output short circuit⁽⁵⁾
18
V
18
±30
V
±15
V
Unlimited
θ_JA
Thermal resistance, junction-to-ambient^{(6) (7)}
TL072
TL074
97.5
°C/W
86
θ_JC Thermal resistance, junction-to-case⁽⁷⁾
TL072
TL074
38.3
°C/W
51.5
T_J
Operating virtual junction temperature
T_stg Storage temperature range
150
°C
–65
150
°C
(1) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating
conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential voltages, are with respect to the midpoint between V_CC+ and V_CC−.
(3) Differential voltages are at IN+, with respect to IN−.
(4) The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less.
(5) The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the
dissipation rating is not exceeded.
(6) Operating at the absolute maximum T_J of 150°C can affect reliability.
(7) The package thermal impedance is calculated in accordance with JESD 51-7.
Copyright © 2011–2012, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Link(s): TL072-EP TL074-EP